{"title":"XDP","description":"","products":[{"product_id":"xtra-cool-transmission-cooler-thermal-bypass-valve-upgrade-13-18-ram-xdp","title":"Xtra Cool Transmission Cooler Thermal Bypass Valve Upgrade 13-18 Ram XDP","description":"\u003cp\u003eReplace the problematic factory thermal bypass valve in your 2013-2018 Dodge Ram 6.7L Diesel before it causes catastrophic failure with the XDP Xtra Cool Transmission Cooler Thermal Bypass Valve Upgrade XD343. The OE thermal bypass valve is designed to route bypass the transmission cooler in cold temperatures in order to bring the transmission up to operating temperature faster.\u003c\/p\u003e\u003cp\u003eUnfortunately, the bimetallic valve commonly fails in the closed position, causing hot transmission fluid to constantly circulate right back into the transmission, never, or barely, passing through the cooler at all. This results in excessive transmission temperatures, potentially damaging your transmission and leaving you stranded on the side of the road with not only an expensive tow bill, but a costly repair bill as well!\u003c\/p\u003e\u003cp\u003eXDP's Thermal Bypass Valve Upgrade utilizes an unrestricted straight through design, eliminating the recirculation aspect of the factory TBV. No more having to worry about when the factory part will fail you. By removing the passageway that returns hot fluid back to the transmission, fluid restriction is reduced, lowering overall transmission temperatures.\u003c\/p\u003e\u003cp\u003eA transmission that runs cool will last longer than one that's always hot. Installation is just like installing the OE part, requiring no cutting or modifications to the factory lines. To prevent leaks before they start, Four (4) new O-rings are supplied as well as two (2) quick connect fittings, making for a complete bolt-on kit for the 68RFE and Aisin AS69RC transmissions.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDirect Replacement\u003c\/li\u003e\n\u003cli\u003eEliminates Hot Fluid Recirculation\u003c\/li\u003e\n\u003cli\u003eCooler Transmission Temperatures\u003c\/li\u003e\n\u003cli\u003eNo Modification Needed For Installation\u003c\/li\u003e\n\u003cli\u003eReplaces Factory Thermal Bypass Valve\u003c\/li\u003e\n\u003cli\u003eFits 68RFE and Aisin AS69RC Transmissions\u003c\/li\u003e\n\u003cli\u003eReplaces OE Part Number: 68186711AA and 68186711AB\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Will also fit Hemi trucks equipped with a 545RFE, 65RFE, or 66RFE transmission.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"XDP","offers":[{"title":"Default Title","offer_id":52665749897509,"sku":"HVCD_XD343","price":99.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/7603\/4597\/files\/XD343_0-HVCD.jpg?v=1782745857"},{"product_id":"cat-adapter-with-1r-0750-filter-bleeder-screw-spacer-01-16-gm-6-6l-duramax-xdp","title":"CAT Adapter with 1R-0750 Filter Bleeder Screw \u0026 Spacer 01-16 GM 6.6L Duramax XDP CA Excl.","description":"\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eNot for sale in California.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe XDP Fuel Filter Adapter, Bleeder Screw \u0026amp; Spacer with CAT 1R-0750 Filter is an easy way to change the fuel filter on your 2001-2016 GM 6.6L Duramax. The durable anodized filter adapter simply threads on to the OEM Filter Head and allows you run the Advanced High Efficiency CAT Filter on your truck.\u003c\/p\u003e\n\u003cp\u003eFor an even easier filter change, a filter head spacer is included to give you more clearance for filter changes, along with an aluminum bleeder screw to replace the factory supplied plastic version that is commonly damaged during routine maintenance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThread On Adapter - Uses Stock Filter Head\u003c\/li\u003e\n\u003cli\u003eUses Advanced High Efficiency CAT 1R-0750 Filter\u003c\/li\u003e\n\u003cli\u003eNo Modifications To Factory Fuel System Needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKit Contents:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCAT 1R-0750 Filter\u003c\/li\u003e\n\u003cli\u003eFuel Filter Head Spacer\u003c\/li\u003e\n\u003cli\u003eXDP Aluminum Air Bleeder Screw\u003c\/li\u003e\n\u003cli\u003eAnodized Filter Adapter with O-Rings\u003c\/li\u003e\n\u003cli\u003eAll Required Hardware for Installation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"XDP","offers":[{"title":"Default Title","offer_id":52665750847781,"sku":"HVCD_XD171","price":99.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/7603\/4597\/files\/XD171_0-HVCD.jpg?v=1782745859"},{"product_id":"crankshaft-pin-kit-01-16-gm-6-6l-duramax-xd331-xdp","title":"Crankshaft Pin Kit 01-16 GM 6.6L Duramax XD331 XDP","description":"\u003cp\u003eAvoid catastrophic engine failure from a sheared dowel pin in your 2001-2016 GM 6.6L Duramax with the XDP Duramax Crankshaft Pin Kit XD331. From the factory, your Duramax uses a dowel pin on the crankshaft to hold the balancer in place. In both stock and performance applications, these dowel pins are easily sheared causing the balancer to spin on the snout of the crankshaft.\u003c\/p\u003e\u003cp\u003eWhen this balancer spins, it can throw off the balance of the engine and create harsh vibrations. Continued operation in these conditions will likely result in serious engine damage such as a broken crankshaft. \u003c\/p\u003e\u003cp\u003eEliminate the risks of engine damage and pin your crankshaft so the balancer stays in place with the XDP Duramax Crankshaft Pin Kit XD331. The Crankshaft Pin Kit includes a specially made jig so you so you can drill the crankshaft without requiring an engine tear-down, or a machine shop. Perfect for the toolbox of the at-home Duramax enthusiast, or a professional shop tech.\u003c\/p\u003e\u003cp\u003eThe included drill bit allows for around 5 procedures to be performed before requiring a replacement. Each kit includes a jig, jig holding bolt, drill bit, pin, and installation instructions.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEngine Tear-Down Not Required\u003c\/li\u003e\n\u003cli\u003eEliminates Factory Dowel Pin Failures\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplication Notes:\u003c\/strong\u003e\u003cbr\u003eIf using PPE, ATI, or a Super Damper, the counter weight must be removed before installing drill collar. \u003cbr\u003e\u003cstrong\u003eWarranty Info:\u003c\/strong\u003e\u003cbr\u003eProducts manufactured by XDP carry a 1-Year warranty against defects in materials and craftsmanship. The Warranty is Limited to one (1) year from the date of sale and limited solely to the parts contained within the product's kit.\u003c\/p\u003e","brand":"XDP","offers":[{"title":"Default Title","offer_id":52665753567525,"sku":"HVCD_XD331","price":159.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/7603\/4597\/files\/XD331-HVCD.jpg?v=1782745861"},{"product_id":"ppe-115000610-air-filter-element","title":"2006-2010 PPE 115000610 Air Filter Element","description":"\u003cp\u003e\u003cspan class=\"message-body-wrapper\"\u003e\u003cspan class=\"message-flex-body\"\u003e\u003cspan class=\"message-body devtools-monospace\"\u003e\u003cspan class=\"objectBox objectBox-string\"\u003eThe PPE 115000610 Air Filter Element is a direct replacement for the old and dirty air filter on your GM 6.6L Duramax LBZ\/LMM diesel engine. This filter is constructed from high-quality materials and delivers the dependable filtration that your vehicle requires. Airborne contaminants can enter the air intake and eventually your engine. If this airborne debris is not caught, it can cause major damage to the engine and at the very least rob your engine of performance. \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan class=\"message-body-wrapper\"\u003e\u003cspan class=\"message-flex-body\"\u003e\u003cspan class=\"message-body devtools-monospace\"\u003e\u003cspan class=\"objectBox objectBox-string\"\u003eFeatures: \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan class=\"message-body-wrapper\"\u003e\u003cspan class=\"message-flex-body\"\u003e\u003cspan class=\"message-body devtools-monospace\"\u003e\u003cspan class=\"objectBox objectBox-string\"\u003eDrop-In Replacement \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"message-body-wrapper\"\u003e\u003cspan class=\"message-flex-body\"\u003e\u003cspan class=\"message-body devtools-monospace\"\u003e\u003cspan class=\"objectBox objectBox-string\"\u003eHigh-Quality Construction\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"XDP","offers":[{"title":"Default Title","offer_id":52665755762981,"sku":"HVCD_115000610","price":35.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/7603\/4597\/files\/115000610_PPE_4.jpg?v=1782745864"},{"product_id":"power-steering-pump-new-with-reservoir-2011-2018-ram-2500-3500-4500-5500-xdp-xtreme-diesel-performance","title":"Power Steering Pump New with Reservoir 2011-2018 Ram 2500\/3500\/4500\/5500 XDP Xtreme Diesel Performance","description":"\u003cp\u003eRestore the steering in your Ram 6.7L diesel by replacing your failed power steering pump with the XDP Power Steering Pump New with Reservoir XD734. Built entirely from brand-new parts, this pump provides you with a durable option that ensures consistent performance. You can stay in control whether you're towing your trailer to a job site, hauling heavy loads, or navigating tough terrain. The XDP Power Steering Pumps give you reliable steering response when you need it most.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOptimized Flow:\u003c\/strong\u003e\u003cbr\u003eThe internal design has been optimized to keep fluid moving freely. This helps to reduce noise from cavitation, also making sure the system doesn't get starved of fluid.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAll-New Bearings:\u003c\/strong\u003e\u003cbr\u003eUnlike rebuilt pumps that reuse old bearings, which are one of the most failure-prone parts, these pumps use only new components to help ensure long-term reliability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDirect-Fit Replacement\u003c\/li\u003e\n\u003cli\u003ePre-Installed Reservoir For Ease and Time Saving Installation\u003c\/li\u003e\n\u003cli\u003eEvery Component Is 100 percent Completely New, Not Remanufactured\u003c\/li\u003e\n\u003cli\u003eOptimize Fluid Cavities Help Reduce Restriction Providing Increased Flow\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eType: Hydraulic\u003c\/li\u003e\n\u003cli\u003ePulley Included: No\u003c\/li\u003e\n\u003cli\u003eRemote Reservoir: No\u003c\/li\u003e\n\u003cli\u003eHose Port Type: O-Ring\u003c\/li\u003e\n\u003cli\u003eReservoir Included: Yes\u003c\/li\u003e\n\u003cli\u003eHousing Material: Aluminum\u003c\/li\u003e\n\u003cli\u003eReservoir Cap Included: Yes\u003c\/li\u003e\n\u003cli\u003ePulley Attachment Type: Press On\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"XDP","offers":[{"title":"Default Title","offer_id":52665758679333,"sku":"HVCD_XD734","price":360.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/7603\/4597\/files\/XD734-HVCD.jpg?v=1782745867"},{"product_id":"premium-balancer-series-stock-replacement-harmonic-balancer-06-10-gm-6-6l-duramax-lbz-lmm-xdp-xtreme-diesel-performance","title":"Premium Balancer Series - Stock Replacement Harmonic Balancer 06-10 GM 6.6L Duramax LBZ\/LMM XDP Xtreme Diesel Performance","description":"\u003cp\u003eThe XDP Premium Balancer Series - Stock Replacement Harmonic Balancer XD710 is a direct-fit replacement for your GM 6.6L Duramax LBZ\/LMM. A harmonic balancer (also known as a crankshaft vibration damper) serves more than just the function of spinning the pulleys on an engine. It is designed to help eliminate engine harmonics, reducing vibrations that might otherwise transfer into the cab of your truck.\u003c\/p\u003e\u003cp\u003eComposed of three primary components - the hub, the rubber damper, and the outer ring, the balancer is carefully calibrated through factors such as sizing and balance to help dampen engine power pulses and provide smooth engine operation.\u003c\/p\u003e\u003cp\u003eThe XDP Premium Balancer Series is an OE-style replacement and designed to deliver excellent strength and durability. Featuring bonded dampening rubber at a competitive price point, they are ideal for technicians and engine rebuilders. In contrast to many other balancers that utilize inexpensive gray iron castings, XDP Premium Balancers are constructed using high-strength Spheroidal Graphite Cast Iron.\u003c\/p\u003e\u003cp\u003eAdditionally, while most OEM balancers rely on press-in dampening rubber that may fail under high-torque serpentine belt applications, XDP harmonic balancers use both inserted and pressure-bonded rubber that produces excellent rubber strength.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDirect Fit Replacement\u003c\/li\u003e\n\u003cli\u003eSpheroidal Graphite Cast Iron Construction\u003c\/li\u003e\n\u003cli\u003eConstructed With Inserted And Pressure-Bonded Rubber\u003c\/li\u003e\n\u003cli\u003eSuperior Bonding Strength Between The Inner And Outer Balancer Rings\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTech Tips:\u003c\/strong\u003e\u003cbr\u003eVehicle manufacturers often times simply recommend inspecting the damper every 30K miles or at set intervals. This can make it hard to determine when to physically replace the damper. When a harmonic balancer requires replacement, these are often some of the most common reasons.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDeterioration of the Rubber Damper:\u003c\/strong\u003e\u003cbr\u003eThe rubber that binds the components of the balancer together is susceptible to degradation when exposed to oil, contaminants, extreme heat, dirt roads, or ozone damage. This deterioration can lead to improper balancer function, often manifesting as unexplained vibrations at idle or at higher speeds. A thorough inspection of the rubber can confirm the issue, and in such cases, the balancer may need to be replaced.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEngine Rebuild:\u003c\/strong\u003e\u003cbr\u003eWhen rebuilding or remanufacturing an engine, it is crucial to replace the harmonic balancer to ensure optimal performance. Installing an old, worn balancer on a freshly rebuilt engine undermines the integrity of the rebuild and could result in undesirable vibrations. A new balancer ensures a smoother, longer-lasting operation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eXD710 Harmonic Balancer Specifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTiming Marks: No\u003c\/li\u003e\n\u003cli\u003eOverall OD (in): 7.796\u003c\/li\u003e\n\u003cli\u003eNose OD (in): 0\u003c\/li\u003e\n\u003cli\u003eOverall Width (in): 2.455\u003c\/li\u003e\n\u003cli\u003eCrank Bore (in): 1.930\u003c\/li\u003e\n\u003cli\u003eRing Width (in): 2.455\u003c\/li\u003e\n\u003cli\u003eBolt Holes: 0\u003c\/li\u003e\n\u003cli\u003eCounterweight Balance: Hub weighted\u003c\/li\u003e\n\u003cli\u003eNo. of Integrated Pulleys: 1\u003c\/li\u003e\n\u003cli\u003ePulley Type 1: Serpentine\u003c\/li\u003e\n\u003cli\u003ePulley Grooves 1: 6\u003c\/li\u003e\n\u003cli\u003ePulley OD 1 (in): 7.560\u003c\/li\u003e\n\u003cli\u003eCrank Trigger\/Exciter Plate: No\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"XDP","offers":[{"title":"Default Title","offer_id":52665760547109,"sku":"HVCD_XD710","price":321.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/7603\/4597\/files\/XD710-HVCD.jpg?v=1782745871"},{"product_id":"cat-fuel-filter-1r-0750","title":"CAT Fuel Filter 1R-0750","description":"\u003cdiv\u003eThe CAT 1R-0750 Fuel Filter is an advanced efficiency fuel filter designed to remove small contaminants that can potentially cause the most harm. Any filter can remove some abrasive particles, but where many competitive filters fail is the ability of capturing and retaining those particles which are most damaging to sensitive fuel system components. This filter features a unique filter media that provides superior protection.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eWith a strong one-piece can design and non-metallic center tube, CAT Fuel Filters maximize cleanliness, improve performance, and protect vital components. This leads to longer life and higher resale value! If your GM Duramax, 5.9L or 6.7L Dodge Ram Diesel is equipped with an XDP CAT Filter Adapter, this is the filter you need to service it. \u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003ch3 style=\"color: rgb(228, 38, 38);\"\u003eFeatures: \u003c\/h3\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e10 Micron Rating\u003c\/li\u003e\n\u003cli\u003eUnique Filter Media\u003c\/li\u003e\n\u003cli\u003eAcrylic Beads Prevent Bunching\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximum Dirt Holding Capability\u003c\/li\u003e\n\u003cli\u003eMolded End Caps Prevent Leaks\u003c\/li\u003e\n\u003cli\u003eAdvanced High Efficiency Filtration\u003c\/li\u003e\n\u003cli\u003eCaptures \u0026amp; Retains Damaging Particles\u003c\/li\u003e\n\u003cli\u003eSpiral Roving Provides Greater Pleat Stability\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eReplacement Filter For XDP CAT Filter Adapter\u003c\/li\u003e\n\u003cli\u003eNylon Center Tube Prevents Metal Contamination\u003c\/li\u003e\n\u003cli\u003eMaximizes Cleanliness \u0026amp; Minimizes Potential Leaks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch3 style=\"color: rgb(228, 38, 38);\"\u003e\u003cspan style=\"font-weight: bold; color: rgb(228, 38, 38);\"\u003eSpecifications:\u003c\/span\u003e\u003c\/h3\u003e\n\u003cdiv\u003eInstallation Type: Spin-On\u003c\/div\u003e\n\u003cdiv\u003eThread Size (Inch): 1 - 14 - 2B\u003c\/div\u003e\n\u003cdiv\u003eHeight (MM): 181.5\u003c\/div\u003e\n\u003cdiv\u003eMedia Type: Cellulose\u003c\/div\u003e\n\u003cdiv\u003eDiameter \/ Length (MM): 85.7\u003c\/div\u003e\n\u003cdiv\u003ePrimary vs Secondary: Secondary\u003c\/div\u003e\n\u003cdiv\u003eEfficiency Rating: Advanced Efficiency\u003c\/div\u003e\n\u003cdiv data-contentsection=\"render_carb_restriction\" data-hook=\"variant_changed__data\"\u003e\u003cbr\u003e\u003c\/div\u003e","brand":"XDP","offers":[{"title":"Default Title","offer_id":52665760874789,"sku":"1R-0750","price":27.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/7603\/4597\/files\/1R0750_CAT.jpg?v=1782745875"},{"product_id":"power-steering-pump-new-with-pulley-and-reservoir-2003-2007-dodge-ram-2500-3500-xdp-xtreme-diesel-performance","title":"Power Steering Pump New with Pulley and Reservoir 2003-2007 Dodge Ram 2500\/3500 XDP Xtreme Diesel Performance","description":"\u003cp\u003eRefresh the steering system in your Dodge Ram 2500\/3500 with the XDP Power Steering Pump New with Pulley and Reservoir XD738. Made from all-new components, this pump delivers a reliable solution built for consistent performance. Whether you're towing to the job site, hauling heavy loads, or tackling rough terrain, you'll stay in control.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImproved Flow:\u003c\/strong\u003e\u003cbr\u003eThe internal design has been optimized to keep fluid moving freely. This helps to reduce noise from cavitation, also making sure the system doesn't get starved of fluid.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAll-New Bearings:\u003c\/strong\u003e\u003cbr\u003eUnlike rebuilt pumps that reuse old bearings, which are one of the most failure-prone parts, these pumps use only new components to help ensure long-term reliability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDirect-Fit Replacement\u003c\/li\u003e\n\u003cli\u003ePre-Installed Pulley And Pipe For Ease And Time Saving Install\u003c\/li\u003e\n\u003cli\u003eEvery Component Is 100 percent Completely New, Not Remanufactured\u003c\/li\u003e\n\u003cli\u003eOptimize Fluid Cavities Help Reduce Restriction Providing Increased Flow\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eType: Hydraulic\u003c\/li\u003e\n\u003cli\u003ePulley Included: Yes\u003c\/li\u003e\n\u003cli\u003eRemote Reservoir: No\u003c\/li\u003e\n\u003cli\u003eHose Port Type: O-Ring\u003c\/li\u003e\n\u003cli\u003eReservoir Included: Yes\u003c\/li\u003e\n\u003cli\u003eHousing Material: Aluminum\u003c\/li\u003e\n\u003cli\u003eReservoir Cap Included: Yes\u003c\/li\u003e\n\u003cli\u003ePulley Attachment Type: Press On\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"XDP","offers":[{"title":"Default Title","offer_id":52665764249893,"sku":"HVCD_XD738","price":244.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/7603\/4597\/files\/XD738-HVCD.jpg?v=1782745880"},{"product_id":"x-tra-cool-water-pump-with-housing-2006-2016-gm-6-6l-duramax-lbz-lmm-lml-and-2006-2009-gm-kodiak-topkick-6-6l-duramax-lbz-lmm-xdp-xtreme-diesel-performance","title":"X-TRA Cool Water Pump (With Housing) 2006-2016 GM 6.6L Duramax LBZ\/LMM\/LML and 2006-2009 GM Kodiak\/Topkick 6.6L Duramax LBZ\/LMM XDP Xtreme Diesel Performance","description":"\u003cp\u003eThe XDP X-TRA Cool Water Pump (With Housing) XD671 will help restore operation to the cooling system in your GM 6.6 Duramax LBZ\/LMM\/LML. This water pump comes with the housing which is known to known to leak or erode due to cavitation and or corrosion in the cooling system.\u003c\/p\u003e\u003cp\u003eThis is a direct-fit replacement that includes the necessary seals for a hassle-free installation. Each unit is manufactured to factory specifications giving you a factory fit and function.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIncludes New Seals\u003c\/li\u003e\n\u003cli\u003eWater Pump and Housing\u003c\/li\u003e\n\u003cli\u003eHigh-Quality Materials\u003c\/li\u003e\n\u003cli\u003eDirect-Fit Replacement\u003c\/li\u003e\n\u003cli\u003e2 Year\/Unlimited Mileage\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHousing Material: Aluminum\u003c\/li\u003e\n\u003cli\u003eHub Height: 2.492 Inch\u003c\/li\u003e\n\u003cli\u003eImpeller Material: Plastic\u003c\/li\u003e\n\u003cli\u003eImpeller Rotation: Standard\u003c\/li\u003e\n\u003cli\u003eImpeller Vane Quantity: 7\u003c\/li\u003e\n\u003cli\u003eIncludes Back Housing: Yes\u003c\/li\u003e\n\u003cli\u003eMounting Hole Quantity: 5\u003c\/li\u003e\n\u003cli\u003eOutlet Quantity: 2\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"XDP","offers":[{"title":"Default Title","offer_id":52665764479269,"sku":"HVCD_XD671","price":185.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/7603\/4597\/files\/XD671-HVCD.jpg?v=1782745882"},{"product_id":"oer-series-intercooler-pipe-with-billet-adapter-2017-2022-ford-6-7l-powerstroke-xdp-xtreme-diesel-performance","title":"OER+ Series Intercooler Pipe with Billet Adapter 2017-2024 Ford 6.7L Powerstroke XDP Xtreme Diesel Performance","description":"\u003cp\u003eThe XDP 6.7L OER Plus Series Intercooler Pipe with Billet Adapter XD364 eliminates the risk of being left stranded due to a blown intercooler pipe in your 2017-2022 Ford 6.7L Powerstroke. Your factory intercooler pipe is made from a plastic\/rubber material that can hardly handle stock load levels.\u003c\/p\u003e\u003cp\u003eIf you do any long-haul heavy towing or hot-shotting, your intercooler pipe can be the next thing to fail. Unfortunately, the intercooler pipe won't just fail while your truck is in the driveway, it'll fail while you're pulling a heavy load, leaving you stranded on the side of the road.\u003c\/p\u003e\u003cp\u003eThe XDP 6.7L OER Plus Direct-Fit Intercooler Pipe XD364 replaces the factory intercooler pipe with a stronger, more reliable unit. Featuring a mandrel-bent, bead-rolled 3 inch steel pipe, this intercooler pipe also includes silicone couplers that are reinforced for increased strength.\u003c\/p\u003e\u003cp\u003eTo keep this a bolt-on installation, the billet aluminum adapter is specially machined to snap into the OEM location. This intercooler pipe does not require tuning or modifications for installation.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIncreased Reliability\u003c\/li\u003e\n\u003cli\u003e3 inch Mandrel-Bent Construction\u003c\/li\u003e\n\u003cli\u003eNo Aftermarket Tuning Required!\u003c\/li\u003e\n\u003cli\u003eBlack Anodized CNC Machined Billet Adapter\u003c\/li\u003e\n\u003cli\u003eReinforced Silicone Couplers and T-Bolt Clamps\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"XDP","offers":[{"title":"Default Title","offer_id":52665765429541,"sku":"HVCD_XD364","price":289.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/7603\/4597\/files\/XD364-HVCD.jpg?v=1782745885"},{"product_id":"xpressor-oer-series-new-he351ve-replacement-turbo-w-actuator-xd572-xdp","title":"Xpressor OER Series New HE351VE Replacement Turbo W\/Actuator XD572 XDP","description":"\u003cp\u003eReplace the worn turbo in your 2007.5-2012 Dodge Ram 6.7L Diesel with an XDP Xpressor Turbo With Actuator (New Stock Replacement) XD572. Issues such as worn seals, lack of lubrication, oil contamination, and excessive temperatures can slowly damage the turbo in your truck.\u003c\/p\u003e\u003cp\u003eCommon symptoms of turbocharger failure can include a loss of power, decrease in fuel economy, noisy operation, increased oil consumption, excessive smoke, or a check engine light.\u003c\/p\u003e\u003cp\u003eThe factory turbocharger is well-known for problems like clogged vanes and actuator failure. Another indication of an issue with your turbo is if the exhaust brake stops functioning. Restore proper operation to your engine with an XDP Xpressor Series Replacement Turbocharger.\u003c\/p\u003e\u003cp\u003eThe XDP Turbo is a high-quality replacement turbo for your Ram without the high costs associated with buying one from your local dealership. This turbocharger offers all the latest engineering updates to help offer a reliable service life and includes a remanufactured actuator.\u003c\/p\u003e\u003cp\u003eEach turbo is subjected to a 100 percent functional end-of-line testing with full RPM sweep and the Noise, Vibration, Harshness (NVH) is analyzed. Hot gas stand and burst test validations are performed along with hydraulic and pneumatic leak testing.\u003c\/p\u003e\u003cp\u003eThis turbocharger is designed as a stock OE-style replacement for your Dodge Ram 2500\/3500\/4500\/5500. The drop-in design ensures a straightforward installation and attaches to all your existing connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDirect-Fit Replacement\u003c\/li\u003e\n\u003cli\u003eIncludes Remanufactured Actuator\u003c\/li\u003e\n\u003cli\u003eCertified To IATF 16949 Standards\u003c\/li\u003e\n\u003cli\u003ePreprogrammed \u0026amp; Ready To Install\u003c\/li\u003e\n\u003cli\u003eHydraulic And Pneumatic Leak Tested\u003c\/li\u003e\n\u003cli\u003eBurst Test \u0026amp; Hot Gas Stand Validated\u003c\/li\u003e\n\u003cli\u003eNoise, Vibration, Harshness (NVH) Analyzed\u003c\/li\u003e\n\u003cli\u003e100 percent End-Of-Line Tested Through Full RPM Sweep\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"XDP","offers":[{"title":"Default Title","offer_id":52665765462309,"sku":"HVCD_XD572","price":2302.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/7603\/4597\/files\/XD572-HVCD.jpg?v=1782745887"},{"product_id":"fuel-filter-adapter-with-cat-1r-0750-filter-10-18-dodge-cummins-6-7l-cat-filter-adapter-xd381-xdp","title":"Fuel Filter Adapter With CAT 1R-0750 Filter 10-18 Dodge Cummins 6.7L CAT Filter Adapter XD381 XDP","description":"\u003cp\u003eUse the XDP Fuel Filter Adapter With CAT 1R-0750 Filter XD381 when you service the fuel system on your 2010-2018 Dodge 6.7L Diesel. The XD381 features a billet aluminum fuel filter head that replaces the stock fuel filter and allows you to mount the CAT 1R-0750 Advanced High Efficiency fuel filter under the hood of your truck.\u003c\/p\u003e\u003cp\u003eRemoving the stock filter housing also eliminates the problematic plastic cap that is known to break and seize.\u003c\/p\u003e\u003cp\u003eEach filter head is built from an ultra-durable billet aluminum construction and comes complete with the necessary components for an easy installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBillet Aluminum Construction\u003c\/li\u003e\n\u003cli\u003eEliminates Stock Canister With Plastic Cap\u003c\/li\u003e\n\u003cli\u003eUses CAT 1R-0750 Advanced High Efficiency Fuel Filter\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"XDP","offers":[{"title":"Default Title","offer_id":52665765495077,"sku":"HVCD_XD381","price":239.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/7603\/4597\/files\/XD381_5-HVCD.jpg?v=1782745889"},{"product_id":"fuel-filter-adapter-with-cat-1r-0750-filter-2007-5-2009-dodge-cummins-6-7l-xd391-xdp","title":"Fuel Filter Adapter With CAT 1R-0750 Filter 2007.5-2009 Dodge Cummins 6.7L XD391 XDP","description":"\u003cp\u003eService the fuel system in your 2007.5-2009 Dodge 6.7L Diesel with the XDP Fuel Filter Adapter With CAT 1R-0750 Filter XD391. The XDP Cat Filter Adapter features a CNC-machined, billet aluminum filter head that is designed to replace the stock filter assembly.\u003c\/p\u003e\u003cp\u003eThe new filter head is designed to accept the CAT 1R-0750 Advanced High Efficiency fuel filter to provide your engine with excellent filtration and protection.\u003c\/p\u003e\u003cp\u003eThe XD391 features a bolt-on installation by mounting the new fuel filter head in place of the factory housing. Removing the factory housing helps to eliminate common issues like cracking, leaks, or seizing with the plastic filter canister design.\u003c\/p\u003e\u003cp\u003eEach kit comes ready to install with filter head, CAT 1R-0750 fuel filter, fuel filter delete (for factory low-pressure lines) and the necessary hardware for installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEliminates Factory Filter Housing\u003c\/li\u003e\n\u003cli\u003eCNC-Machined Billet Aluminum Filter Head\u003c\/li\u003e\n\u003cli\u003eIncludes CAT 1R-0750 Advanced High Efficiency Fuel Filter\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"XDP","offers":[{"title":"Default Title","offer_id":52665765527845,"sku":"HVCD_XD391","price":199.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/7603\/4597\/files\/XD391-HVCD.jpg?v=1782745891"},{"product_id":"xtra-cool-direct-fit-replacement-radiator-03-09-dodge-5-9l-6-7l-cummins-xd296-xdp","title":"Xtra Cool Direct-Fit Replacement Radiator 03-09 Dodge 5.9L\/6.7L Cummins XD296 XDP","description":"\u003cp\u003eThe XDP Xtra Cool Direct-Fit Replacement Radiator XD296 is the perfect replacement for the old leaking radiator in your 2003-2009 Dodge 5.9L\/6.7L Diesel. While the Xtra Cool Radiator may look like a factory replacement, it's far from it!\u003c\/p\u003e\u003cp\u003eThe XDP's Xtra Cool Radiators are built with techniques used in the semi-truck and HD industry. Unlike the OEM radiator, the extra steps taken during manufacturing provide you with the durability and strength to protect your engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHigh Efficiency Core\u003c\/strong\u003e \u003cbr\u003eXtra Cool Radiators feature a high efficiency core, with heavy-duty tubes and more fins per inch to maximize cooling capabilities.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInternally Reinforced\u003c\/strong\u003e\u003cbr\u003eSpecial aluminum brazing techniques are used during construction to increase strength. The reinforced ends tubes and added strength at the outside corners protect the core where it is most vulnerable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGasket Design\u003c\/strong\u003e\u003cbr\u003eXDP uses a proprietary rubber gasket to withstand contraction, expansion, and flex in the front end of your truck.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eUpgraded End Tanks\u003c\/strong\u003e\u003cbr\u003eStrategically placed reinforcement ribs are added to the end tanks to eliminate common failure points. The plastic mix used to construct these tanks has a fiber reinforcement to increased strength over the factory tanks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eUpgraded Mounting Points\u003c\/strong\u003e\u003cbr\u003eTo eliminate failure from mounting locations, the integrated mounting points have been upgraded for added strength and longevity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTank Attachment\u003c\/strong\u003e\u003cbr\u003eUsing a heavy gauge steel crimp strip instead of aluminum like the factory is another construction method used to make the Xtra Cool Radiators last. This heavy-duty crimp helps to eliminate the tank and core separation common with the factory radiator.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDirect-Fit Replacement\u003c\/li\u003e\n\u003cli\u003eUpgraded Design For Increased Durability\u003c\/li\u003e\n\u003cli\u003eHigh-Efficiency Core To Maximize Cooling\u003c\/li\u003e\n\u003cli\u003eXD296 Specifications:\u003c\/li\u003e\n\u003cli\u003eRow Quantity: 1\u003c\/li\u003e\n\u003cli\u003eCore Width: 27 Inch\u003c\/li\u003e\n\u003cli\u003eCore Height: 29-1\/4 Inch\u003c\/li\u003e\n\u003cli\u003eCore Thickness: 1-5\/8 Inch\u003c\/li\u003e\n\u003cli\u003eInlet Connection: 2 Inch\u003c\/li\u003e\n\u003cli\u003eOutlet Connection: 2 Inch\u003c\/li\u003e\n\u003cli\u003eOEM Part Numbers 55037652, 52028900AD, 55056816AA, 52028900AG, 55056816AB\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"XDP","offers":[{"title":"Default Title","offer_id":52665765560613,"sku":"HVCD_XD296","price":319.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/7603\/4597\/files\/XD296-HVCD.jpg?v=1782745893"},{"product_id":"220-amp-alternator-high-output-01-07-gm-6-6l-duramax-xd224-xdp","title":"220 Amp Alternator High Output 01-07 GM 6.6L Duramax XD224 XDP","description":"\u003cp\u003eCommon add-on accessories like plows, on-board air compressors, horn kits, off-road lighting and even performance electronics can max out the capabilities of your factory charging system. \u003c\/p\u003e\u003cp\u003eIncrease charging system reliability and output while alleviating the strain caused by the aftermarket upgrades on your truck. The XDP High Output 220 Amp Alternator almost doubles the factory output, giving you the ability to put your truck to work whether youre out all night plowing snow, or at an event showing off your stereo system upgrades. \u003c\/p\u003e\u003cp\u003eThe XDP High Output 220 Amp Alternator is a direct bolt-on replacement and requires no modifications for installation. Each alternator comes pre-tested and is ready for installation. \u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e220 Amp\u003c\/li\u003e\n\u003cli\u003eBolt-On Upgrade\u003c\/li\u003e\n\u003cli\u003e100 percent Brand New, No Core!\u003c\/li\u003e\n\u003cli\u003e1-Year Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eXD224 Specifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAmp: 220\u003c\/li\u003e\n\u003cli\u003eVoltage: 12V\u003c\/li\u003e\n\u003cli\u003eRotation: Clockwise\u003c\/li\u003e\n\u003cli\u003ePulley Class: S6, 6-Groove Pulley\u003c\/li\u003e\n\u003cli\u003eInternal Regulator\u003c\/li\u003e\n\u003cli\u003eInternal Fan\u003c\/li\u003e\n\u003cli\u003ePolarity: Negative\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e If used in a dual alternator application, the output wire must be upgraded.\u003cbr\u003e\u003cstrong\u003eWarranty Info:\u003c\/strong\u003e\u003cbr\u003eProducts manufactured by XDP carry a 1-Year warranty against defects in materials and craftsmanship. The Warranty is Limited to one (1) year from the date of sale and limited solely to the parts contained within the product's kit.\u003c\/p\u003e","brand":"XDP","offers":[{"title":"Default Title","offer_id":52665765593381,"sku":"HVCD_XD224","price":299.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/7603\/4597\/files\/XD224-HVCD.jpg?v=1782745896"},{"product_id":"sun-coast-10l1000-pvb-pro-loc-valve-body-pump-kit","title":"Sun Coast 10L1000-PVB Pro Loc Valve Body \u0026 Pump Kit","description":"\u003cp\u003eThe Sun Coast 10L1000-PVB Pro Loc Valve Body \u0026amp; Pump Kit will enhance the performance of the Allison 10L1000 transmission in your GM 6.6L Duramax L5P. With the SunCoast 10L1000 Pro Loc valve body, several key issues seen regarding the 10L1000 transmissions are addressed. This is not an approach that is simply upping the line pressure in hopes of getting more clamping force. It's a multi-faceted approach addressing numerous key issues when exposing these units to more demanding driving loads. These include drag racing, street racing, and heavy towing \u0026amp; hauling. \u003cbr\u003e\u003cbr\u003eIt is impressive that the factory 10L1000 transmission lock-up circuit can make converter lockup seem to smooth and uneventful. The level of refinement in its involvement is unquestionably higher than what has hitherto been observed. Even though this feels good in terms of NVH (noise vibration harshness), it can become a major issue when circumstances occur when the load demands exceed the vehicle's original design specifications or testing its limits. \u003cbr\u003e\u003cbr\u003eThe SunCoast 10L1000 Valve Body specifically looks to speed up the time from initial lock-up apply to zero turbine slip. To increase lockup holding and apply fluid pressure, the torque converter clutch (TCC) valve is replaced, changing the lockup circuit. By modifying crucial oiling circuits to let the fluid to reach the TCC clutch, the lockup oil transition time is also shortened, which reduces TCC clutch deterioration by enabling a faster application time. Improved reliability and performance are made possible by lowering degradation per apply cycle. \u003cbr\u003e\u003cbr\u003eThe lubricating circuit is the next aspect to be addressed. The 10L1000 transmission's lubrication circuit is in charge of providing oil to the clutches, bushings, planets, and other components. The lube circuit oil is distributed throughout the transmission from the factory at pressures as low as 6 PSI. Under normal load conditions, this is completely fine. An increase in lubrication to planets, steels, and clutches is appropriate for handling the increasing demands and reducing heat in more demanding and stressful situations. \u003cbr\u003e\u003cbr\u003eThis Valve Body specifically increases pressure in this circuit from 6 PSI to a whopping 20 PSI. This results in less frictional heat generated, which is a 250% improvement over the factory calibration. In high-horsepower applications, premature failure can become more noticeable, although this heat reduction can help extend the life of the transmission. \u003cbr\u003e\u003cbr\u003eThe regulator valve (latch valve) circuit is another modification made to the SunCoast Pro Loc 10L1000 Valve Body. The clutches are fully engaged by this oil circuit, which provides full clutch line pressure. The regulator valve that is specifically targeted in factory form is in control of clutch packs A, B, C, and F. \u003cbr\u003eAs the first and most prominent clutch pack failure with the 10L1000 in higher horsepower or more demanding conditions, the \"F\" clutch is the main clutch pack concern. \u003cbr\u003e\u003cbr\u003eIn a factory 10L1000 valve body calibration, the regulator valve (latch valve) becomes fully engaged, allowing full fluid flow for engagement at 120 psi. When this happens, the oncoming clutch pack delivers the maximum clamping force. The maximum static and dynamic holding capacity is determined when the clamping force is applied to its maximum capacity. This is perfectly fine in factory form or even slightly modified vehicles, but it might be a weak point when the vehicle is exposed to more demanding conditions. \u003cbr\u003e\u003cbr\u003eWith the SunCoast 10L1000 Valve Body, the required pressure to fully engage the regulator is decreased to only 80psi. This is a 33% decrease in pressure needed to engage the clutch regulator valve (latch valve), leading to quicker shift apply when engaging clutches A, B, C, and F. In addition to reducing shift times, this faster engagement lowers the heat generated in the clutch pack, preventing premature degradation and increasing clutch life. To improve this shift calibration further, SunCoast is evacuating non-critical oil to raise apply rate. \u003cbr\u003e\u003cbr\u003eWith this new SunCoast pump\/valve body combination, the factory total line pressure has been modified. The total main line pressure has increased by up to 60 psi thanks to SunCoast. This enhanced line pressure raises the total pump volume production in addition to the maximum clamping force of the clutch packs. The SunCoast 10L1000 Valve Body has an integrated bypass to release excess pressure above 420 psi, minimizing the chance of runaway pressure and clutch fiber over-compression. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eFeatures:\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eImproved Clutch Wear\u003c\/li\u003e\n\u003cli\u003eShortened Shift Times\u003c\/li\u003e\n\u003cli\u003eIncreased Lock-Up Apply Pressure\u003c\/li\u003e\n\u003cli\u003e250% Increase In Cooler Charge Pressure\u003c\/li\u003e\n\u003cli\u003eIncreased Line Pressure, As Much As 60psi\u003c\/li\u003e\n\u003cli\u003eIncreased Clamping Force On All Clutch Packs\u003c\/li\u003e\n\u003cli\u003e33% Decrease In Maximal Pressure Actuation Of Clutch Packs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e`\u003c\/p\u003e","brand":"XDP","offers":[{"title":"Default Title","offer_id":52665765626149,"sku":"10L1000-PVB","price":2595.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/7603\/4597\/files\/10L1000-PVB_SunCoast_1.jpg?v=1782745898"},{"product_id":"stock-power-steering-gearbox-1981-1993-dodge-d-w-250-350-xdp-xtreme-diesel-performance","title":"Stock+ Power Steering Gearbox 1981-1993 Dodge D\/W 250\/350 XDP Xtreme Diesel Performance","description":"\u003cp\u003eThe XDP Stock+ Power Steering Gearbox (New) XD753 is an ideal replacement for the worn steering gear in your Dodge D\/W truck. The most common cause of a failing steering gearbox (also known as a steering gear or steering box) is long-term wear and tear. Over time, internal components such as the worm gear, sector gear, and bearings can wear down or get damaged. Other contributing factors may include rough road conditions, potholes, and fluid leaks.\u003c\/p\u003e\u003cp\u003eSymptoms of a worn steering gearbox include a leaking sector shaft seal, excessive play in the steering wheel (loose or unresponsive steering), or the vehicle wandering or pulling while driving. Other signs to watch for are difficulty turning, leaking fluid, a stiff steering wheel, and grinding or clunking noises coming from the steering system. As the condition worsens, you may also notice that more effort is required to steer, especially at lower speeds or when maneuvering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNew, Not Remanufactured\u003c\/strong\u003e\u003cbr\u003eBuilt with 100 percent new components, the XDP Stock+ Power Steering Gearbox is designed to provide you with a long and dependable service life. Each unit features a bolt-on design and is pre-tested for function before shipping to ensure a hassle-free installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePerformance Tested\u003c\/strong\u003e\u003cbr\u003eEach XDP Steering Box includes a unique test inspection report. These functional tests are designed to check the steering feel and function with the results listed for input torque, maximum effort, returnability, backlash, and total turns, as well as a post-test leak check.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand New\u003c\/li\u003e\n\u003cli\u003eNo Core Charge\u003c\/li\u003e\n\u003cli\u003eEvery Component Is 100 percent Completely New, Not Remanufactured\u003c\/li\u003e\n\u003cli\u003eInspection Report Included With Steering Feel and Function Test Results\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInput Shaft Diameter: 0.73\u003c\/li\u003e\n\u003cli\u003eOutput Shaft Diameter: 1.25\u003c\/li\u003e\n\u003cli\u003ePower Assisted: Yes\u003c\/li\u003e\n\u003cli\u003ePressure Port Thread Size: 18-1.5MM\u003c\/li\u003e\n\u003cli\u003eReturn Port Thread Size: 16-1.5MM\u003c\/li\u003e\n\u003cli\u003eTotal Turns Lock To Lock: 3.4-4\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"XDP","offers":[{"title":"Default Title","offer_id":52665765658917,"sku":"HVCD_XD753","price":608.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/7603\/4597\/files\/XD753-HVCD.jpg?v=1782745900"},{"product_id":"power-steering-pump-new-with-reservoir-1990-1993-dodge-d-w-250-350-1994-1996-dodge-ram-2500-3500-xdp-xtreme-diesel-performance","title":"Power Steering Pump New with Reservoir 1990-1993 Dodge D\/W 250\/350\/1994-1996 Dodge Ram 2500\/3500 XDP Xtreme Diesel Performance","description":"\u003cp\u003eRepair the steering in your Dodge 5.9L diesel with the XDP Power Steering Pump New with Reservoir XD741. Built entirely from brand-new parts, this pump provides you with a durable option that ensures consistent function and performance. You can stay in control whether you're towing your trailer to a job site, hauling heavy loads, or navigating rough terrain. The XDP Power Steering Pumps give you reliable steering response when you need it most.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOptimized Flow:\u003c\/strong\u003e\u003cbr\u003eThe internal design has been optimized to keep fluid moving freely. This helps to reduce noise from cavitation, also making sure the system doesn't get starved of fluid.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAll-New Bearings:\u003c\/strong\u003e\u003cbr\u003eUnlike rebuilt pumps that reuse old bearings, which are one of the most failure-prone parts, these pumps use only new components to help ensure long-term reliability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDirect-Fit Replacement\u003c\/li\u003e\n\u003cli\u003ePre-Installed Reservoir For Ease and Time Saving Installation\u003c\/li\u003e\n\u003cli\u003eEvery Component Is 100 percent Completely New, Not Remanufactured\u003c\/li\u003e\n\u003cli\u003eOptimize Fluid Cavities Help Reduce Restriction Providing Increased Flow\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eType: Hydraulic\u003c\/li\u003e\n\u003cli\u003ePulley Included: No\u003c\/li\u003e\n\u003cli\u003eRemote Reservoir: No\u003c\/li\u003e\n\u003cli\u003eHose Port Type: O-Ring\u003c\/li\u003e\n\u003cli\u003eReservoir Included: Yes\u003c\/li\u003e\n\u003cli\u003eHousing Material: Cast Iron\u003c\/li\u003e\n\u003cli\u003eReservoir Cap Included: Yes\u003c\/li\u003e\n\u003cli\u003ePulley Attachment Type: Press On\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"XDP","offers":[{"title":"Default Title","offer_id":52665766150437,"sku":"HVCD_XD741","price":233.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/7603\/4597\/files\/XD741-HVCD.jpg?v=1782745902"},{"product_id":"power-steering-pump-new-with-reservoir-2011-2022-chevrolet-silverado-gmc-sierra-2500hd-3500hd-xdp-xtreme-diesel-performance","title":"Power Steering Pump New with Reservoir 2011-2022 Chevrolet Silverado\/GMC Sierra 2500HD\/3500HD XDP Xtreme Diesel Performance","description":"\u003cp\u003eRestore proper steering performance in your GM 6.6L Duramax LML\/L5P with the XDP Power Steering Pump New with Reservoir XD740. Made from all-new components, this pump delivers a reliable solution built for consistent performance. Whether you're towing to the job site, hauling heavy loads, or tackling rough terrain, you'll stay in control.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOptimized Flow:\u003c\/strong\u003e\u003cbr\u003eThe internal design has been optimized to keep fluid moving freely. This helps to reduce noise from cavitation, also making sure the system doesn't get starved of fluid.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAll-New Bearings:\u003c\/strong\u003e\u003cbr\u003eUnlike rebuilt pumps that reuse old bearings, which are one of the most failure-prone parts, these pumps use only new components to help ensure long-term reliability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDirect-Fit Replacement\u003c\/li\u003e\n\u003cli\u003ePre-Installed Reservoir For Ease and Time Saving Installation\u003c\/li\u003e\n\u003cli\u003eEvery Component Is 100 percent Completely New, Not Remanufactured\u003c\/li\u003e\n\u003cli\u003eOptimize Fluid Cavities Help Reduce Restriction Providing Increased Flow\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eType: Hydraulic\u003c\/li\u003e\n\u003cli\u003eFilter Included: No\u003c\/li\u003e\n\u003cli\u003ePulley Included: No\u003c\/li\u003e\n\u003cli\u003eRemote Reservoir: No\u003c\/li\u003e\n\u003cli\u003eReservoir Included: Yes\u003c\/li\u003e\n\u003cli\u003eHousing Material: Aluminum\u003c\/li\u003e\n\u003cli\u003eReservoir Cap Included: Yes\u003c\/li\u003e\n\u003cli\u003eRemote Reservoir Included: No\u003c\/li\u003e\n\u003cli\u003eMounting Hardware Included: No\u003c\/li\u003e\n\u003cli\u003ePulley Attachment Type: Press On\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"XDP","offers":[{"title":"Default Title","offer_id":52665766183205,"sku":"HVCD_XD740","price":314.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/7603\/4597\/files\/XD740-HVCD.jpg?v=1782745904"},{"product_id":"xdp-billet-tow-race-series-flex-plate-1994-2003-ford-7-3l-powerstroke-e4od-4r100-copy","title":"Kryptonite Upper Control Arm Kit KRUCA11","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eThe Kryptonite Upper Control Arm Kit KRUCA11 will enhance the suspension in front of your GM Silverado\/Sierra 2500HD\/3500HD. These upper control arms are manufactured from laser-cut steel that is machine-formed and precision welded for supreme strength. These UCAs will improve the ride of most leveled or lifted as well as a great upgrade for your stock-height pickup. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003eThe grease fittings on the upper control arms can often be hard to reach. Kryptonite has eliminated this issue by changing the locations of the fitting on these upper control arms. The hardware kits with these UCAs include multiple grease fittings and port plugs allowing you to have great serviceability no matter how your upper control arms sit.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003eFEATURES: \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003eBoxed Design\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003eDurable Coating\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003eLaser Cut \u0026amp; Welded\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003eKryptonite Bolt On Upper Ball Joints\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003eKIT INCLUDES:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003e1 x Hardware Package\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003e4 x Control Arm Sleeves\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003e8 x Control Arm Bushings\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003e1 x Kryptonite Upper Control Arm Pair\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003e2 x Kryptonite Bolt On Upper Ball Joints\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003e When running stock wheels with oversized tires clearance is limited and may rub control arm.\u003c\/span\u003e\u003c\/p\u003e","brand":"XDP","offers":[{"title":"Default Title","offer_id":52665766215973,"sku":"KRYKRUCA11","price":699.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/7603\/4597\/files\/KRUCA11_Kryptonite-Products_1_600x600_da52366f-72a9-4728-a98d-4e5968909c2e.jpg?v=1782745906"},{"product_id":"xdp-tow-series-flex-plate-2001-2016-gm-6-6l-duramax-lb7-lly-lbz-lmm-lml-allison-a1000","title":"XDP Tow Series Flex Plate 2001-2016 GM 6.6L Duramax LB7\/LLY\/LBZ\/LMM\/LML Allison A1000","description":"\u003cp\u003eThe XDP Tow Series Flex Plate XD644 is a must-have to replace the factory flex plate if you have made performance upgrades to your diesel. If your truck is used for constant heavy-duty towing, it's only a matter of time before your factory flex plate fails.\u003c\/p\u003e\u003cp\u003eModifications and continuous heavy hauling add further strain to the flex plate that can result in heat spots from the torque converter. These heat cycles can cause these heat spots to crack and even cause the center of the flexplate to tear apart.\u003c\/p\u003e\u003cp\u003eThe Tow Series Flex Plate is engineered to withstand the abuse of heavy towing and not break the bank. Not only is this flex plate ideal for towing, but the additional strength makes it well suited for competition, off-road, and other severe duty conditions.\u003c\/p\u003e\u003cp\u003eThis flexplate is manufactured from cold rolled steel and features a black e-coat finish that helps prevent corrosion. Being SFI 29.1 approved, it will be able to last for many years of competition and heavy-duty use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSFI 29.1 Certified\u003c\/li\u003e\n\u003cli\u003eManufactured From Cold Rolled Steel\u003c\/li\u003e\n\u003cli\u003eBlack E-Coat Finish Helps Prevent Rust\u003c\/li\u003e\n\u003cli\u003e4mm Thick Centerplate Provides Rigidity\u003c\/li\u003e\n\u003cli\u003eIdeal For Heavy-Duty Towing, Competition, \u0026amp; Severe-Duty Requirements\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplication Notes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInternal Balance\u003c\/li\u003e\n\u003cli\u003eWithout Ring Gear\u003c\/li\u003e\n\u003cli\u003eAllison LCT-1000\/2000\/2400\u003c\/li\u003e\n\u003cli\u003eSome trucks may be equipped with one or two shims or spacers on either side of the OEM flex plate.\u003c\/li\u003e\n\u003cli\u003eThese shims or spacers will not be needed for installation of the XDP flex plate as it is thicker than the OEM flex plate.\u003c\/li\u003e\n\u003cli\u003eRemoval of any shims or spacers is necessary to ensure good thread engagement of the flex plate bolts to the crankshaft.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"XDP","offers":[{"title":"Default Title","offer_id":52665766248741,"sku":"HVCD_XD644","price":199.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/7603\/4597\/files\/XD644-HVCD.jpg?v=1782745909"},{"product_id":"xdp-stock-series-flex-plate-1994-2003-ford-7-3l-powerstroke-e4od-4r100","title":"XDP Stock+ Series Flex Plate 1994-2003 Ford 7.3L Powerstroke E4OD\/4R100","description":"\u003cp\u003eThe XDP Stock+ Series Flex Plate XD643 provides your vehicle with a durable and dependable flex plate that can handle the demands of increased horsepower and torque. The stock flex plate in your truck is designed to withstand moderate to heavy-duty towing and mild HP upgrades.\u003c\/p\u003e\u003cp\u003eHeavier loads, additional horsepower, and frequent towing can tax the flex plate which can result in heat spots from the torque converter. Through enough heat cycles, these heat spots can eventually crack and even cause the flexplate to break apart.\u003c\/p\u003e\u003cp\u003eThe Stock+ Series Flex Plate features a cold-rolled steel construction with a 4mm thick center plate. This helps provide a more solid foundation and absorbs more stress from the drivetrain compared to the factory flexplate. In addition, the ring gear is robotically cold-welded for accuracy and allows this flex plate to meet SFI specifications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSFI 29.1 Certified\u003c\/li\u003e\n\u003cli\u003eConstructed From Cold-Rolled Steel\u003c\/li\u003e\n\u003cli\u003eRobotically Cold-Welded Ring Gear\u003c\/li\u003e\n\u003cli\u003e4mm Thick Centerplate Provides Rigidity\u003c\/li\u003e\n\u003cli\u003eIdeal For Stock and Slightly Modified Trucks\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplication Notes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e155 Teeth\u003c\/li\u003e\n\u003cli\u003eExternal Balance\u003c\/li\u003e\n\u003cli\u003eSome trucks may be equipped with one or two shims or spacers on either side of the OEM flex plate.\u003c\/li\u003e\n\u003cli\u003eThese shims or spacers will not be needed for installation of the XDP flex plate as it is thicker than the OEM flex plate.\u003c\/li\u003e\n\u003cli\u003eRemoval of any shims or spacers is necessary to ensure good thread engagement of the flex plate bolts to the crankshaft.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"XDP","offers":[{"title":"Default Title","offer_id":52665766281509,"sku":"HVCD_XD643","price":188.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/7603\/4597\/files\/XD643-HVCD.jpg?v=1782745911"},{"product_id":"xdp-fuel-system-contamination-kit-no-pump-stock-replacement-xd615","title":"XDP Fuel System Contamination Kit - No Pump (Stock Replacement) XD615","description":"\u003cp\u003eThe XDP Fuel System Contamination Kit - No Pump (Stock Replacement) XD615 will help you get your vehicle back on the road. The factory injection pump can be a failure point in the fuel system and often fails in a disastrous manner.\u003c\/p\u003e\u003cp\u003eAs a result, debris can contaminate the fuel injectors, fuel injector lines, fuel rails and many other components throughout the system. To properly repair this issue, all fuel delivery components must be replaced to ensure contamination of replacement parts does not occur.\u003c\/p\u003e\u003cp\u003eThis XDP Fuel Contamination Kit is an ideal solution to get your vehicle back on the road and operating properly.\u003c\/p\u003e\u003cp\u003eThis kit includes all major components to complete the repair properly without cutting any corners.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFuel Feed Line\u003c\/li\u003e\n\u003cli\u003eFuel Return Line\u003c\/li\u003e\n\u003cli\u003e(8) Fuel Injector Lines\u003c\/li\u003e\n\u003cli\u003e(2) Genuine Bosch Fuel Rails\u003c\/li\u003e\n\u003cli\u003e(8) Genuine Bosch Remanufactured Fuel Injectors\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"XDP","offers":[{"title":"Default Title","offer_id":52665766314277,"sku":"HVCD_XD615","price":3620.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/7603\/4597\/files\/XD615-HVCD.jpg?v=1782745913"},{"product_id":"xdp-fuel-system-contamination-kit-no-pump-stock-replacement-2015-2016-ford-6-7l-powerstroke","title":"XDP Fuel System Contamination Kit No Pump (Stock Replacement) 2015-2016 Ford 6.7L Powerstroke","description":"\u003cp\u003eThe XDP Fuel System Contamination Kit - No Pump (Stock Replacement) XD612 will help you get your 2015-2016 Ford 6.7L Powerstroke back up and running. The OE CP4 injection pump in the Super Duty trucks is acknowledged as a common failure point in the fuel system and often fails in a disastrous manner.\u003c\/p\u003e\u003cp\u003eAs a result, debris from a CP4 failure contaminates the fuel injector lines, fuel rails, fuel injectors, and many other lines and hoses throughout the entire fuel system. To repair the failed pump and avoid the risk of contaminating the replacement parts, all the components mentioned must then be replaced.\u003c\/p\u003e\u003cp\u003eTrying to flush the fuel system doesn't ensure that all the remaining metal shavings or debris will be removed from the system. The XDP OER Series Fuel Contamination Kit is excellent replacement for your Powerstroke engine with a failed CP4 fuel injection pump, DEF contamination, or water in the fuel tank.\u003c\/p\u003e\u003cp\u003eThis XDP OER Series Fuel Contamination Kit comes with all the major pieces you need to get your truck back on the road but allows you to choose your own high-pressure pump such as the S\u0026amp;S Diesel 6.7F-DCP CP4 To DCR Conversion. Other components included with this kit are fuel injectors, fuel injector lines, fuel rails, and many more parts.\u003c\/p\u003e\u003cp\u003eSwapping out all of these components will help ensure that all the injection pump debris are out of the fuel system. This will make sure that the replacement components won't get contaminated from the previous pump failure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e(1) Fuel Return Line\u003c\/li\u003e\n\u003cli\u003e(8) Fuel Injector Lines\u003c\/li\u003e\n\u003cli\u003e(1) CP4 Pump Installation Kit\u003c\/li\u003e\n\u003cli\u003e(8) Fuel Injector Hold Down Bolts\u003c\/li\u003e\n\u003cli\u003e(2) Genuine Bosch Fuel Rails With Sensors\u003c\/li\u003e\n\u003cli\u003e(8) Genuine Bosch Remanufactured Fuel Injectors\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2015-2016 Ford F-250 Super Duty (6.7L Powerstroke)\u003c\/li\u003e\n\u003cli\u003e2015-2016 Ford F-350 Super Duty (6.7L Powerstroke)\u003c\/li\u003e\n\u003cli\u003e2015-2016 Ford F-450 Super Duty (6.7L Powerstroke)\u003c\/li\u003e\n\u003cli\u003e2015-2016 Ford F-550 Super Duty (6.7L Powerstroke)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"XDP","offers":[{"title":"Default Title","offer_id":52665766347045,"sku":"HVCD_XD612","price":3870.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/7603\/4597\/files\/XD612-HVCD.jpg?v=1782745915"},{"product_id":"xdp-xtra-cool-direct-fit-replacement-radiator-1999-2003-ford-7-3l-powerstroke","title":"XDP Xtra Cool Direct-Fit Replacement Radiator 1999-2003 Ford 7.3L Powerstroke","description":"\u003cp\u003eThe XDP Xtra Cool Direct-Fit Replacement Radiator XD538 is a high-quality replacement for the leaking or failed unit in your 1999-2003 Ford 7.3L Powerstroke. The Xtra Cool Radiators give you a direct-fit replacement with special construction techniques borrowed from the HD and semi-truck industry.\u003c\/p\u003e\u003cp\u003eExtra steps taken during manufacturing ensure additional strength and durability to protect your engine and cooling system. Factory radiators often fail for many reasons. Common issues such as debris in your cooling system like rust and sediment can clog passages along with aging coolant that over time can cause internal erosion of your radiator.\u003c\/p\u003e\u003cp\u003eHigh temperatures and high internal pressure can cause the end tanks to swell, creating leaks, and in the worst case, a blowout. In addition to internal damage, radiators are also susceptible to damage from road debris and front-end collisions.\u003c\/p\u003e\u003cp\u003eDon't let an old inefficient radiator be the cause of overheating conditions. Replace it today with an Xtra Cool Radiator.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e Features: \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDirect-Fit Replacement\u003c\/li\u003e\n\u003cli\u003eUpgraded Failure Points For Increased Durability\u003c\/li\u003e\n\u003cli\u003eHigh-Efficiency Core To Maximize Engine Cooling\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eXD358 Specifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003c\/strong\u003e Core Width: 26-1\/2 inch\u003c\/li\u003e\n\u003cli\u003eCore Height: 29-3\/4 inch\u003c\/li\u003e\n\u003cli\u003eCore Thickness: 2-1\/4 inch\u003c\/li\u003e\n\u003cli\u003eInlet Connection: 1-3\/4 inch\u003c\/li\u003e\n\u003cli\u003eOutlet Connection: 1-3\/4 inch\u003c\/li\u003e\n\u003cli\u003eTrans Oil Cooler: 3\/8 inch\u003c\/li\u003e\n\u003cli\u003eInverted Flare Fittings\u003c\/li\u003e\n\u003cli\u003eXDP 1-Year Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWarranty Info:\u003c\/strong\u003e Products manufactured by XDP carry a 1-Year warranty against defects in materials and craftsmanship. The Warranty is Limited to one (1) year from the date of sale and limited solely to the parts contained within the product's kit.\u003c\/p\u003e","brand":"XDP","offers":[{"title":"Default Title","offer_id":52665766379813,"sku":"HVCD_XD538","price":312.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/7603\/4597\/files\/XD538-HVCD.jpg?v=1782745917"},{"product_id":"oer-series-new-fuel-rail-assembly-driver-side-2011-2019-ford-6-7l-powerstroke-xdp-xtreme-diesel-performance","title":"OER Series New Fuel Rail Assembly (Driver Side) 2011-2019 Ford 6.7L Powerstroke XDP Xtreme Diesel Performance","description":"\u003cp\u003eThe XDP OER Series New Fuel Rail Assembly (Driver Side) XD603 will replace the contaminated rail in your 2011-2019 Ford 6.7L Powerstroke. The failure-prone CP4 is known to send debris throughout the entire fuel system, including the fuel rails.\u003c\/p\u003e\u003cp\u003eLike all XDP OER Series components, this unit is built to meet OEM specifications. Each fuel rail comes ready to install with a new fuel rail pressure sensor and fuel pressure relief valve.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDirect-Fit Replacement\u003c\/li\u003e\n\u003cli\u003eNew Rail Pressure Sensor\u003c\/li\u003e\n\u003cli\u003eNew Driver Side Fuel Rail\u003c\/li\u003e\n\u003cli\u003eNew Pressure Relief Valve\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"XDP","offers":[{"title":"Default Title","offer_id":52665766412581,"sku":"HVCD_XD603","price":393.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/7603\/4597\/files\/XD603-HVCD.jpg?v=1782745919"},{"product_id":"x-tra-cool-direct-fit-replacement-main-radiator-2017-2022-ford-6-7l-powerstroke-xdp-xtreme-diesel-performance","title":"X-TRA Cool Direct-Fit Replacement Main Radiator 2017-2022 Ford 6.7L Powerstroke XDP Xtreme Diesel Performance","description":"\u003cp\u003eThe XDP X-TRA Cool Direct-Fit Replacement Main Radiator XD463 is designed as a direct-fit replacement for the leaky radiator in your 2017-2022 Ford 6.7L Powerstroke. This X-TRA Cool Radiator gives you the same perfect fit and finish as the factory radiator, at a lower price than the stock replacement from your local dealer.\u003c\/p\u003e\u003cp\u003eThis X-TRA Cool Radiator is manufactured from high-quality materials and is constructed to meet the same strict standards as the OEM of the factory unit.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOE Quality\u003c\/li\u003e\n\u003cli\u003eMain Radiator\u003c\/li\u003e\n\u003cli\u003eDirect-Fit Replacement\u003c\/li\u003e\n\u003cli\u003eXD461 Specifications:\u003c\/li\u003e\n\u003cli\u003eCore Height: 38-1\/2 inch\u003c\/li\u003e\n\u003cli\u003eCore Width: 27-7\/8 inch\u003c\/li\u003e\n\u003cli\u003eCore Thickness: 1-5\/8 inch\u003c\/li\u003e\n\u003cli\u003eInlet Size: 2-3\/16 inch\u003c\/li\u003e\n\u003cli\u003eOutlet Size: 2-3\/16 inch\u003c\/li\u003e\n\u003cli\u003eOEM Part Number HC3Z8005B, HC3Z8005J, LC3Z8005B\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"XDP","offers":[{"title":"Default Title","offer_id":52665766445349,"sku":"HVCD_XD463","price":414.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/7603\/4597\/files\/XD463-HVCD.jpg?v=1782745922"},{"product_id":"remanufactured-cp3-fuel-pump-stock-replacement-xdp","title":"Remanufactured CP3 Fuel Pump (Stock Replacement) XDP","description":"\u003cp\u003eThe XDP Remanufactured CP3 Fuel Pump (Stock Replacement) XD598 will get your 2007.5-2018 Dodge Ram 6.7L Cummins back on the road. A failed or poorly functioning CP3 pump can create low fuel rail pressure which can cause power loss, no start conditions, or even leave you stranded.\u003c\/p\u003e\u003cp\u003eEvery fuel pump is remanufactured utilizing the highest quality components and is engineered to meet the OEM specifications. All XDP CP3 pumps include a 1-year warranty for peace of mind and are end-of-line tested to ensure function and long service life.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRemanufactured CP3 Fuel Pump\u003c\/li\u003e\n\u003cli\u003eStock Fuel Flow\u003c\/li\u003e\n\u003cli\u003eDirect-Fit Replacement\u003c\/li\u003e\n\u003cli\u003eEnd-Of-Line Testing To Ensure Quality\u003c\/li\u003e\n\u003cli\u003eAssembled With High-Quality Components\u003c\/li\u003e\n\u003cli\u003eRemanufactured To Stringent OEM Specifications\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"XDP","offers":[{"title":"Default Title","offer_id":52665766478117,"sku":"HVCD_XD598","price":665.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/7603\/4597\/files\/XD598_0-HVCD.jpg?v=1782745924"},{"product_id":"x220-series-head-stud-kit-xd3010hs-xdp","title":"X220 Series Head Stud Kit XD3010HS XDP","description":"\u003cp\u003eUpgrade your 1998.5-2024 Dodge Ram 5.9L\/6.7L Diesel with the XDP X220 Series Head Stud Kit XD3010HS. Upgrading the OEM head bolts is a must when adding horsepower and torque to your diesel-powered Ram 2500\/3500.\u003c\/p\u003e\u003cp\u003eThe factory head bolts typically can't handle the additional pressure from high-performance applications which can lead to the cylinder head lifting. Upgrading to these XDP head studs helps to keep cylinder head locked down and avoid head gasket failures. Constructed using an 8740 Chromoly Steel with an added proprietary element ensures these studs are more durable and will not stretch like the stock bolts.\u003c\/p\u003e\u003cp\u003eThe threads are rolled after heat-treating to deliver optimum fatigue strength. These studs are rated at 205,000+ psi yield strength and 225,000+ psi tensile strength to ensure a strong hold under higher combustion pressures.\u003c\/p\u003e\u003cp\u003eIn addition to the upgraded strength, replacing the head bolts with studs also allows you to obtain a more precise torque reading. A bolt gets twisted as it is tightened, so it's reacting to two different forces at the same time.\u003c\/p\u003e\u003cp\u003eWith a head stud the force gets applied to the vertical axis, resulting in a more even clamping force. Studs can also ensure proper alignment of the cylinder heads every time and provide for easier engine assembly.\u003c\/p\u003e\u003cp\u003eUnlike the OEM Torque-To-Yield (TTY) bolts which must be replaced after each use, these studs are reusable which makes them a must have for high-performance applications. Kit includes 12-point nuts, washers, and installation instructions. Assembly lubricant sold separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIncludes Washers \u0026amp; 12 Point Nuts\u003c\/li\u003e\n\u003cli\u003eYield Strength 205K psi - 215K psi\u003c\/li\u003e\n\u003cli\u003eTensile Strength 225K psi - 233K psi\u003c\/li\u003e\n\u003cli\u003eWill Not Stretch Like The Factory Bolts\u003c\/li\u003e\n\u003cli\u003eThread Has Been Rolled After Heat Treatment\u003c\/li\u003e\n\u003cli\u003eHigh-Strength 8740 Chromoly Steel Construction\u003c\/li\u003e\n\u003cli\u003e10mm Studs Test Out At A Max Load: Over 120KN\u003c\/li\u003e\n\u003cli\u003eStuds Are Reusable, Unlike Torque-To-Yield (TTY) Bolts Which Much Be Replaced After Each Use\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eXDP Thread Cleaning Chasers (Sold Separately):\u003c\/strong\u003e\u003cbr\u003eThe XD40125TC is a great add-on that will be critical during installation. Thread Cleaning Chasers are an excellent tool to have on-hand to ensure you have properly cleaned the threads in your engine block before the installation of any fasteners. Clean threads provide accurate torque readings and will help give you peace of mind during your engine build or head gasket repair.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eXDP X-TRA Slick Engine \u0026amp; Fastener Assembly Lubricant (Sold Separately):\u003c\/strong\u003e\u003cbr\u003eThe use of XD541 is highly recommended during engine assembly. Apply XDP X-TRA Slick Lubricant to head studs, head bolts, main studs, main bolts, connecting rod bolts, and any other fasteners used during engine assembly.\u003c\/p\u003e\u003cp\u003eUsing a proper assembly lubricant during fastener installation reduces friction and torque pre-load scatter in the torquing sequence, while also helping to prevent thread galling and seizing.\u003c\/p\u003e","brand":"XDP","offers":[{"title":"Default Title","offer_id":52665766510885,"sku":"HVCD_XD3010HS","price":399.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/7603\/4597\/files\/XD3010HS-HVCD.jpg?v=1782745926"},{"product_id":"xpressor-oer-series-new-hx35w-replacement-turbocharger-xd580-xdp","title":"Xpressor OER Series New HX35W Replacement Turbocharger XD580 XDP","description":"\u003cp\u003eThe XDP Xpressor OER Series New HX35W Replacement Turbocharger XD580 is a stock OE-style replacement for the damaged or worn turbo in your 1999-2002 Dodge 5.9L Cummins. Issues such as oil contamination, lack of lubrication, worn seals, and excessive temperatures can wear out the turbo in your truck.\u003c\/p\u003e\u003cp\u003eCommon signs of failure in a factory turbocharger can include noisy operation, loss of power, decreased fuel economy, increased oil consumption, excessive smoke, or a check engine light. The XDP Xpressor OER Series Replacement Turbocharger can help restore proper operation to your engine.\u003c\/p\u003e\u003cp\u003eThe XDP Xpressor New Turbocharger is a high-quality replacement turbo without the high cost from your local dealership. This turbo is 100 percent brand-new and is not rebuilt or remanufactured. It incorporates all the latest engineering updates to help provide optimum performance and a reliable service life.\u003c\/p\u003e\u003cp\u003eEach turbo goes through a strict 100 percent functional end-of-line testing through the full RPM sweep along with burst test and hot gas stand validations. An NVH (Noise, Vibration, Harshness) analysis is performed as well as hydraulic and pneumatic leak testing.\u003c\/p\u003e\u003cp\u003eThe Xpressor OER Series New HX35W Replacement Turbocharger is a direct replacement for your Ram 2500\/3500. The drop-in design attaches to all of your existing factory connections and provide a straightforward installation. A turbocharger installation kit is also included.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand-New Turbocharger\u003c\/li\u003e\n\u003cli\u003eDirect-Fit Replacement\u003c\/li\u003e\n\u003cli\u003eCertified To IATF 16949 Standards\u003c\/li\u003e\n\u003cli\u003eHydraulic and Pneumatic Leak Tested\u003c\/li\u003e\n\u003cli\u003eBurst Test and Hot Gas Stand Validated\u003c\/li\u003e\n\u003cli\u003eIncludes Turbocharger Installation Kit\u003c\/li\u003e\n\u003cli\u003eNVH (Noise, Vibration, Harshness) Analyzed\u003c\/li\u003e\n\u003cli\u003e100 percent End-Of-Line Tested Through Full RPM Sweep\u003c\/li\u003e\n\u003cli\u003ePerformance Verified To Meet Or Exceed OE Specifications\u003c\/li\u003e\n\u003cli\u003eCovered by XDP's 1-Year Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"XDP","offers":[{"title":"Default Title","offer_id":52665766543653,"sku":"HVCD_XD580","price":750.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/7603\/4597\/files\/XD580-HVCD.jpg?v=1782745928"},{"product_id":"xpressor-oer-series-new-hx35w-replacement-turbocharger-xd579-xdp","title":"Xpressor OER Series New HX35W Replacement Turbocharger XD579 XDP","description":"\u003cp\u003eThe XDP Xpressor OER Series New HX35W Replacement Turbocharger XD579 is a stock OE-style replacement for the failed turbo in your 1999-2000 Dodge 5.9L Cummins. Issues such as worn seals, oil contamination, lack of lubrication, and excessive temperatures can damage your turbo over time.\u003c\/p\u003e\u003cp\u003eCommon symptoms of factory turbocharger failure can include noisy operation, loss of power, decreased fuel economy, increased oil consumption, excessive smoke, or a check engine light. Restore proper operation of your Ram 2500\/3500 with an XDP Xpressor OER Series Replacement Turbocharger.\u003c\/p\u003e\u003cp\u003eThe XDP Xpressor New Turbocharger is a high-quality replacement turbo without the high costs of going through your local dealership. This unit is 100 percent brand-new and is not rebuilt or remanufactured. It incorporates all the latest updates to help provide a reliable service life and optimum performance.\u003c\/p\u003e\u003cp\u003eEach turbo goes through a rigorous 100 percent functional end-of-line testing through the full RPM range along with a Noise, Vibration, Harshness (NVH) analysis. Pneumatic and hydraulic leak testing is performed, along with burst test and hot gas stand validations.\u003c\/p\u003e\u003cp\u003eThe Xpressor OER Series New HX35W Replacement Turbocharger is a direct-fit replacement for your engine. The drop-in design offers a straightforward installation and connects to all of your existing factory components. A turbocharger mounting gasket set is also included.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e100 percent New Turbocharger\u003c\/li\u003e\n\u003cli\u003eDirect-Fit Replacement\u003c\/li\u003e\n\u003cli\u003eMeets Or Exceeds OE Specs\u003c\/li\u003e\n\u003cli\u003eCertified To IATF 16949 Standards\u003c\/li\u003e\n\u003cli\u003ePneumatic and Hydraulic Leak Tested\u003c\/li\u003e\n\u003cli\u003eBurst Test and Hot Gas Stand Validated\u003c\/li\u003e\n\u003cli\u003eNoise, Vibration, Harshness (NVH) Analyzed\u003c\/li\u003e\n\u003cli\u003eIncludes Turbocharger Mounting Gasket Set\u003c\/li\u003e\n\u003cli\u003e100 percent End-Of-Line Tested Through Full RPM Sweep\u003c\/li\u003e\n\u003cli\u003eCovered by XDP's 1-Year Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"XDP","offers":[{"title":"Default Title","offer_id":52665766609189,"sku":"HVCD_XD579","price":752.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/7603\/4597\/files\/XD579-HVCD.jpg?v=1782745930"},{"product_id":"xdp-xpressor-oer-series-new-v2s-turbochargers-high-low-press-xd575","title":"XDP Xpressor OER Series New V2S Turbochargers (High \u0026 Low Press) XD575","description":"\u003cp\u003eReplace the damaged high-pressure and low-pressure turbos in your 2008-2010 Ford 6.4L Powerstroke with the XDP Xpressor OER Series New V2S Turbochargers (High and Low Press) XD575. Issues such as a lack of lubrication, oil contamination, worn seals, excessive temperatures, and over-speeding of the turbo can gradually damage the turbos in your Super Duty.\u003c\/p\u003e\u003cp\u003eCommon symptoms of\u0026amp;nbsp; the V2S turbocharger failure can include noisy operation, excessive smoke, a significant loss of power, decrease in fuel economy, increased oil consumption, or a check engine light. Restore operation of your 6.4 with Xpressor OER Series Replacement Turbochargers from XDP.\u003c\/p\u003e\u003cp\u003eThe XDP Xpressor OER Series Turbochargers are high-quality replacement turbos for your truck without the high price tag of buying them from your local dealership. This unit is 100 percent brand-new and is not rebuilt or remanufactured.\u003c\/p\u003e\u003cp\u003eTo ensure optimum performance and reliability all the latest design and engineering updates are implemented. Each turbo goes through a rigorous 100 percent end-of-line testing with full RPM range and Noise, Vibration, Harshness (NVH) analysis. Hydraulic and pneumatic leak testing is performed along with hot gas stand and burst test validations.\u003c\/p\u003e\u003cp\u003eThe Xpressor OER Series New V2S Replacement Turbochargers are stock OE-style replacements for the high-pressure and low-pressure turbos in your F-250\/350\/450\/550. The drop-in design ensures a straightforward installation and attaches to all your existing factory connections. A turbocharger installation kit is also provided with new O-rings, gaskets, and bolts.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHigh-Pressure and Low-Pressure\u003c\/li\u003e\n\u003cli\u003e100 percent Brand-New Turbochargers\u003c\/li\u003e\n\u003cli\u003eDirect-Fit OE-Style Replacements\u003c\/li\u003e\n\u003cli\u003eCertified To IATF 16949 Standards\u003c\/li\u003e\n\u003cli\u003eMeets Or Exceed OE Specifications\u003c\/li\u003e\n\u003cli\u003eHydraulic and Pneumatic Leak Tested\u003c\/li\u003e\n\u003cli\u003eBurst Test and Hot Gas Stand Validated\u003c\/li\u003e\n\u003cli\u003eIncludes Turbocharger Installation Kit\u003c\/li\u003e\n\u003cli\u003eNoise, Vibration, Harshness (NVH) Analyzed\u003c\/li\u003e\n\u003cli\u003eVGT\/VNT Function Tested For Proper Operation\u003c\/li\u003e\n\u003cli\u003e100 percent End-Of-Line Tested Through Full RPM Sweep\u003c\/li\u003e\n\u003cli\u003eBacked by XDP's 1-Year Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"XDP","offers":[{"title":"Default Title","offer_id":52665766641957,"sku":"HVCD_XD575","price":2195.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/7603\/4597\/files\/XD575-HVCD.jpg?v=1782745932"},{"product_id":"xdp-xpressor-oer-series-reman-gt3788va-replacement-turbocharger-xd556","title":"XDP Xpressor OER Series Reman GT3788VA Replacement Turbocharger XD556","description":"\u003cp\u003eThe XDP Xpressor Turbo (Remanufactured Stock Replacement) XD556 is a direct-fit replacement for the worn turbo in your 2011-2016 GM 6.6L Duramax LML. Issues such as excessive temperatures, over-speeding of the turbo, a lack of lubrication, oil contamination, or worn seals can slowly cause damage to the turbo in your Chevy\/GMC.\u003c\/p\u003e\u003cp\u003eCommon signs of turbocharger failure can include a significant loss of power, decreased fuel economy, noisy operation, excessive smoke, increased oil consumption, or a check engine light. The factory turbocharger is notorious for issues such as soot and ash buildup in the turbine housing causing the vanes to stick or a seized unison ring.\u003c\/p\u003e\u003cp\u003eXDP now makes it easy to restore proper operation of your Duramax LML with the Xpressor OER Series Replacement Turbocharger.\u003c\/p\u003e\u003cp\u003eXDP Xpressor Turbo (Remanufactured Stock Replacement) XD556 follow a comprehensive remanufacturing process to ensure it meets O.E. specifications. Each turbocharger begins with a complete disassembly. Once disassembled into the individual components, each part is thoroughly cleaned and inspected.\u003c\/p\u003e\u003cp\u003eNext, checks are performed for microscopic damage at the housing, compressor, turbine wheels, and rotating assembly. Before reassembly, all bearing surfaces are precision machined. The wheels and rotating assemblies are balanced to OEM specifications. All critical wear parts such as seals, thrust plates, bearings, and fasteners are replaced.\u003c\/p\u003e\u003cp\u003eA 100 percent end-of-line testing is performed through the full RPM range along with a NVH analysis to ensure the highest quality turbochargers and components. In addition, hot gas stand and burst test validations are done as well as hydraulic and pneumatic leak testing.\u003c\/p\u003e\u003cp\u003eThe XDP Xpressor Turbo (Remanufactured Stock Replacement) XD556 is a high-quality turbo for your 2011-2016 Chevrolet Silverado 2500HD\/3500HD or GMC Sierra 2500HD\/3500HD. The drop-in design allows this stock replacement turbo to simply bolt in place and attach to all the existing factory connections.\u003c\/p\u003e\u003cp\u003eA turbocharger installation kit is also provided with upper and lower oil drain gaskets, oil feed and turbo coolant banjo seals, and an up-pipe to turbo gasket.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRemanufactured\u003c\/li\u003e\n\u003cli\u003eDirect-Fit Replacement\u003c\/li\u003e\n\u003cli\u003eCertified To IATF 16949 Standards\u003c\/li\u003e\n\u003cli\u003eBearing Surfaces Precision Machined\u003c\/li\u003e\n\u003cli\u003eIncludes Turbocharger Installation Kit\u003c\/li\u003e\n\u003cli\u003eHydraulic And Pneumatic Leak Tested\u003c\/li\u003e\n\u003cli\u003eBurst Test and Hot Gas Stand Validated\u003c\/li\u003e\n\u003cli\u003eFunction Tested For Proper Operation\u003c\/li\u003e\n\u003cli\u003eNoise, Vibration, Harshness (NVH) Analyzed\u003c\/li\u003e\n\u003cli\u003eAll Wear Components and Fasteners Replaced\u003c\/li\u003e\n\u003cli\u003e100 percent End-Of-Line Tested Through Full RPM Sweep\u003c\/li\u003e\n\u003cli\u003eThrust Bearing, Journal Bearing, and Oil Slinger Replacement\u003c\/li\u003e\n\u003cli\u003eBacked By XDP's 1-Year Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"XDP","offers":[{"title":"Default Title","offer_id":52665766674725,"sku":"HVCD_XD556","price":953.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/7603\/4597\/files\/XD556-HVCD.jpg?v=1782745935"},{"product_id":"xdp-xpressor-oer-series-reman-gt3788va-replacement-turbocharger-xd553","title":"XDP Xpressor OER Series Reman GT3788VA Replacement Turbocharger XD553","description":"\u003cp\u003eThe XDP Xpressor Turbo (Remanufactured Stock Replacement) XD553 is a direct-fit replacement for the failed turbo in your 2004.5-2005 GM 6.6L Duramax LLY. Issues such as a lack of lubrication, oil contamination, worn seals, excessive temperatures, and over-speeding can slowly cause damage to the turbo in your Chevy or GMC truck. Signs of turbocharger failure can include a loss of power, decrease in fuel economy, noisy operation, excessive smoke, increased oil consumption, or a check engine light.\u003c\/p\u003e\u003cp\u003eThis turbo is also well-known for common issues like the vanes sticking or a seized unison ring. Restore the performance of your Duramax LLY with an XDP Xpressor OER Series Replacement Turbocharger.\u003c\/p\u003e\u003cp\u003eXpressor OER Series Remanufactured Turbochargers are subjected to a strict remanufacturing process to ensure it meets O.E. specs. The turbochargers begin with a complete disassembly and each component is thoroughly cleaned and inspected. Visual checks are performed for any microscopic damage to the turbine wheels, rotating assembly, compressor, and housing. All bearing surfaces are precision machined before assembly.\u003c\/p\u003e\u003cp\u003eThe wheels and rotating assemblies are then balanced to OEM specifications before being installed. Critical wear parts and components such as seals, thrust plates, bearings, and fasteners are all replaced. A 100 percent end-of-line testing is performed through the full RPM range along with a NVH analysis to ensure the highest quality turbochargers. In addition, hydraulic and pneumatic leak testing is done as well as hot gas stand and burst test validations.\u003c\/p\u003e\u003cp\u003eThe XDP Xpressor Turbo (Remanufactured Stock Replacement) XD553 is a high-quality turbo for your 2004.5-2005 Chevrolet Silverado or GMC Sierra 2500HD\/3500HD. The drop-in design allows this stock replacement turbo to offer a straightforward install and attaches to all the existing factory connections. A turbocharger installation kit is also included with new oil feed and turbo coolant banjo seals, up-pipe to turbo gasket, as well as upper and lower oil drain gaskets.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRemanufactured\u003c\/li\u003e\n\u003cli\u003eDirect-Fit Replacement\u003c\/li\u003e\n\u003cli\u003eCertified To IATF 16949 Standards\u003c\/li\u003e\n\u003cli\u003eTurbocharger Installation Kit Included\u003c\/li\u003e\n\u003cli\u003eHot Gas Stand And Burst Test Validated\u003c\/li\u003e\n\u003cli\u003eNoise, Vibration, Harshness (NVH) Analyzed\u003c\/li\u003e\n\u003cli\u003eBearing Surfaces Undergo Precision Machining\u003c\/li\u003e\n\u003cli\u003eHydraulic And Pneumatic Leak Testing Performed\u003c\/li\u003e\n\u003cli\u003eAll Critical Wear Components and Fasteners Replaced\u003c\/li\u003e\n\u003cli\u003e100 percent End-Of-Line Tested Through Complete RPM Range\u003c\/li\u003e\n\u003cli\u003eThrust Bearing, Journal Bearing, And Oil Slinger Are Replaced\u003c\/li\u003e\n\u003cli\u003eCovered By XDP's 1-Year Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"XDP","offers":[{"title":"Default Title","offer_id":52665766740261,"sku":"HVCD_XD553","price":929.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/7603\/4597\/files\/XD553-HVCD.jpg?v=1782745937"},{"product_id":"xdp-xpressor-oer-series-reman-gt3782va-replacement-turbocharger-xd551","title":"XDP Xpressor OER Series Reman GT3782VA Replacement Turbocharger XD551","description":"\u003cp\u003eThe XDP Xpressor Turbo (Remanufactured Stock Replacement) XD551 is a direct-fit replacement for the worn turbo in your 2004-2005 Ford 6.0L Powerstroke. Issues such as excessive temperatures, over-speeding of the turbo, a lack of lubrication, oil contamination, or worn seals can slowly cause damage to the turbo in your Super Duty. Common signs of turbocharger failure can include a significant loss of power, decreased fuel economy, noisy operation, excessive smoke, increased oil consumption, or a check engine light.\u003c\/p\u003e\u003cp\u003eThe factory turbocharger is notorious for issues such as soot and ash buildup in the turbine housing causing the vanes to stick or a seized unison ring. XDP now makes it easy to restore proper operation of your 6.0 with the Xpressor OER Series Replacement Turbocharger.\u003c\/p\u003e\u003cp\u003eXpressor OER Series Remanufactured Turbochargers follow a rigorous remanufacturing process to ensure it meets O.E. specifications. Each turbocharger begins by being completely disassembled. Once disassembled into individual components, each part is thoroughly cleaned and inspected.\u003c\/p\u003e\u003cp\u003eNext, checks are performed for microscopic damage at the housing, compressor, turbine wheels, and rotating assembly. All bearing surfaces are then precision machined before reassembly. The wheels and rotating assemblies are balanced to OEM specifications. All critical wear parts such as seals, thrust plates, bearings, and fasteners are replaced.\u003c\/p\u003e\u003cp\u003eA 100 percent end-of-line testing is performed through the full RPM sweep along with a Noise, Vibration, Harshness (NVH) analysis to ensure the highest quality turbochargers and components. In addition, hot gas stand and burst test validations are done as well as hydraulic and pneumatic leak testing.\u003c\/p\u003e\u003cp\u003eThe XDP Xpressor Turbo (Remanufactured Stock Replacement) XD551 is a high-quality turbo for your F-250\/350\/450\/550 or Excursion. The drop-in design allows this stock replacement turbocharger to simply bolt in place and connect to all the existing factory connections.\u003c\/p\u003e\u003cp\u003eA turbocharger installation kit is also provided with new O-rings, bolts, and an oil feed line gasket.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRemanufactured\u003c\/li\u003e\n\u003cli\u003eDirect-Fit Replacement\u003c\/li\u003e\n\u003cli\u003eCertified To IATF 16949 Standards\u003c\/li\u003e\n\u003cli\u003eIncludes Turbocharger Installation Kit\u003c\/li\u003e\n\u003cli\u003eBearing Surfaces Precision Machined\u003c\/li\u003e\n\u003cli\u003eHydraulic And Pneumatic Leak Tested\u003c\/li\u003e\n\u003cli\u003eFunction Tested For Proper Operation\u003c\/li\u003e\n\u003cli\u003eBurst Test and Hot Gas Stand Validated\u003c\/li\u003e\n\u003cli\u003eNoise, Vibration, Harshness (NVH) Analyzed\u003c\/li\u003e\n\u003cli\u003eAll Wear Components and Fasteners Replaced\u003c\/li\u003e\n\u003cli\u003e100 percent End-Of-Line Tested Through Full RPM Sweep\u003c\/li\u003e\n\u003cli\u003eThrust Bearing, Journal Bearing, and Oil Slinger Replacement\u003c\/li\u003e\n\u003cli\u003eCovered By XDP's 1-Year Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"XDP","offers":[{"title":"Default Title","offer_id":52665766773029,"sku":"HVCD_XD551","price":636.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/7603\/4597\/files\/XD551-HVCD.jpg?v=1782745939"},{"product_id":"xdp-xpressor-oer-series-reman-gt3782va-replacement-turbocharger-xd550","title":"XDP Xpressor OER Series Reman GT3782VA Replacement Turbocharger XD550","description":"\u003cp\u003eThe XDP Xpressor Turbo (Remanufactured Stock Replacement) XD550 is a direct-fit replacement for the tired turbo in your 2005.5-2007 Ford 6.0L Diesel. Issues such as a lack of lubrication, oil contamination, over-speeding of the turbo, and excessive temperatures can gradually cause damage to the turbo in your Super Duty. Common symptoms of turbocharger failure can include a significant loss of power, decreased fuel economy, noisy operation, excessive smoke, increased oil consumption, or a check engine light.\u003c\/p\u003e\u003cp\u003eThe factory turbocharger is notorious for issues such as the vanes sticking and a seized unison ring. Restore proper operation of your 6.0 with the Xpressor OER Series Replacement Turbocharger from XDP.\u003c\/p\u003e\u003cp\u003eXpressor OER Series Remanufactured Turbochargers follow a rigorous remanufacturing process to ensure it meets O.E. performance specifications. Each turbocharger is completely disassembled right down to the last nut and bolt. Once disassembled into individual components, each part is thoroughly cleaned and inspected.\u003c\/p\u003e\u003cp\u003eNext, checks for microscopic damage at the housing, compressor, turbine wheels, and rotating assembly are performed. Before reassembly all bearing surfaces are precision machined to a like-new condition. The wheels and rotating assemblies are then balanced to OEM specifications. All critical wear parts such as seals, thrust plates, bearings, and fasteners are replaced.\u003c\/p\u003e\u003cp\u003eTo ensure the highest quality turbochargers and components, a 100 percent end-of-line testing is performed through the full RPM range along with a Noise, Vibration, Harshness (NVH) analysis. In addition, burst test and hot gas stand validations are done as well as leak tests for both oil and air.\u003c\/p\u003e\u003cp\u003eThe XDP Xpressor Turbo (Remanufactured Stock Replacement) XD550 is a high-quality turbo for your F-250\/350\/450\/550. The drop-in design allows this stock replacement turbo to simply bolt-in place and connect to all the factory equipment. A turbocharger installation kit is also provided with new O-rings, bolts, and an oil feed line gasket.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRemanufactured\u003c\/li\u003e\n\u003cli\u003eDirect-Fit Replacement\u003c\/li\u003e\n\u003cli\u003eLeak Tested For Both Oil and Air\u003c\/li\u003e\n\u003cli\u003eCertified To IATF 16949 Standards\u003c\/li\u003e\n\u003cli\u003eIncludes Turbocharger Installation Kit\u003c\/li\u003e\n\u003cli\u003eFunction Tested For Proper Operation\u003c\/li\u003e\n\u003cli\u003eBurst Test And Hot Gas Stand Validated\u003c\/li\u003e\n\u003cli\u003eNoise, Vibration, Harshness (NVH) Analyzed\u003c\/li\u003e\n\u003cli\u003eAll Wear Components and Fasteners Replaced\u003c\/li\u003e\n\u003cli\u003e100 percent End-Of-Line Tested Through Full RPM Range\u003c\/li\u003e\n\u003cli\u003eThrust Bearing, Journal Bearing, and Oil Slinger Replacement\u003c\/li\u003e\n\u003cli\u003eBearing Surfaces Precision Machined To Like-New Condition\u003c\/li\u003e\n\u003cli\u003eBacked By XDP's 1-Year Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"XDP","offers":[{"title":"Default Title","offer_id":52665766805797,"sku":"HVCD_XD550","price":636.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/7603\/4597\/files\/XD550-HVCD.jpg?v=1782745941"},{"product_id":"remanufactured-cp3-fuel-pump-06-10-gm-6-6l-duramax-lbz-lmm-xdp-xtreme-diesel-performance","title":"Remanufactured CP3 Fuel Pump 06-10 GM 6.6L Duramax LBZ\/LMM XDP Xtreme Diesel Performance","description":"\u003cp\u003eReplace the failed CP3 fuel pump on your 2006-2010 GM 6.6L Duramax LBZ\/LMM with the XDP Remanufactured CP3 Fuel Pump (Stock Replacement) XD523. If your fuel rail pressure is low or you’re experiencing a loss of power, it could be due to a failed CP3 pump.\u003c\/p\u003e\u003cp\u003eThis CP3 Fuel Pump from XDP is assembled using high-quality components and is remanufactured to meet or exceed strict factory specifications. Every pump is end-of-line tested to ensure a long service life and includes a 1-year warranty.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRemanufactured CP3 Pump\u003c\/li\u003e\n\u003cli\u003eMeets OE Specifications\u003c\/li\u003e\n\u003cli\u003eEnd-Of-Line Testing To Ensure Quality\u003c\/li\u003e\n\u003cli\u003eAssembled With High-Quality Components\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"XDP","offers":[{"title":"Default Title","offer_id":52665766838565,"sku":"HVCD_XD523","price":665.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/7603\/4597\/files\/XD523-HVCD.jpg?v=1782745944"},{"product_id":"xdp-wrinkle-black-hd-high-output-alternator-06-07-ford-6-0l-powerstroke-xd349","title":"XDP Wrinkle Black HD High Output Alternator 06-07 Ford 6.0L Powerstroke XD349","description":"\u003cp\u003eThe XDP Wrinkle Black HD High Output Alternator XD349 is a high-output replacement for the underperforming alternator in your 2006-2007 Ford 6.0L Powerstroke. Many Powerstroke trucks are equipped with aftermarket accessories like off-road lightbars, audio systems, snow plows, and other electrical add-ons.\u003c\/p\u003e\u003cp\u003eThe capacity of your factory charging system can be quickly overwhelmed with these common and popular additions.\u003c\/p\u003e\u003cp\u003eThe output of this HD Series Alternator is substantially better than your OEM alternator, allowing you to keep up with the requirements of any aftermarket equipment. Each unit is coated in a wrinkle-black finish to prevent corrosion while also enhancing the engine bay of your truck.\u003c\/p\u003e\u003cp\u003eEach unit is pre-tested before shipping with included results. This alternator comes ready for installation using the factory mounting points, original connections, and the factory sized belt.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWrinkle Black Finish\u003c\/li\u003e\n\u003cli\u003eBrand New, No Core!\u003c\/li\u003e\n\u003cli\u003e200 Amp Peak Output\u003c\/li\u003e\n\u003cli\u003e130 Amp Output At Idle\u003c\/li\u003e\n\u003cli\u003eDirect-Fit Replacement\u003c\/li\u003e\n\u003cli\u003ePre-Tested With Included Results\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"XDP","offers":[{"title":"Default Title","offer_id":52665766904101,"sku":"HVCD_XD349","price":439.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/7603\/4597\/files\/XD349-HVCD.jpg?v=1782745946"},{"product_id":"xdp-x-tra-cool-direct-fit-replacement-secondary-radiator-xd467-for-2017-2020-ford-6-7l-powerstroke-secondary-radiator","title":"XDP X-TRA Cool Direct-Fit Replacement Secondary Radiator XD467 For 2017-2020 Ford 6.7L Powerstroke (Secondary Radiator)","description":"\u003cp\u003eThe XDP X-TRA Cool Direct-Fit Replacement Secondary Radiator XD467 is the perfect option to replace the failed or leaking radiator in your 2017-2020 Ford 6.7L Powerstroke. This radiator is designed as a direct-fit replacement that is lower in cost than a new radiator from your local Ford dealer.\u003c\/p\u003e\u003cp\u003eThe XDP X-TRA Cool Radiators are constructed from only the highest quality materials to maintain a factory fit, finish, and function. Each radiator is ready for installation and is backed by the XDP 1-year, unlimited mileage warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eOE Quality Direct-Fit Replacement Secondary Radiator XD467\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e Specifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCore Height: 39-1\/4 Inch\u003c\/li\u003e\n\u003cli\u003eCore Width: 20-5\/8 Inch\u003c\/li\u003e\n\u003cli\u003eDepth: 1-5\/8 Inch\u003c\/li\u003e\n\u003cli\u003eRows: 2\u003c\/li\u003e\n\u003cli\u003eInlet Size: 7\/8 Inch\u003c\/li\u003e\n\u003cli\u003eQuick Connect Outlet Size: 7\/8 Inch\u003c\/li\u003e\n\u003cli\u003eQuick Connect Transmission Oil Cooler: No OEM Part HC3Z8005A, HC3Z8005E Application\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e Auxiliary radiator.\u003c\/p\u003e\u003cul\u003e\u003cli\u003eFits F-250\/350\/450\/550 models with 6.7L Powerstroke.\u003c\/li\u003e\u003c\/ul\u003e","brand":"XDP","offers":[{"title":"Default Title","offer_id":52665766936869,"sku":"HVCD_XD467","price":499.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/7603\/4597\/files\/XD467_2-HVCD.jpg?v=1782745948"},{"product_id":"hd-high-output-alternator-new-wrinkle-black-xd512-for-2003-2007-dodge-5-9l-cummins-xdp","title":"HD High Output Alternator (New) Wrinkle Black XD512 For 2003-2007 Dodge 5.9L Cummins XDP","description":"\u003cp\u003eThe XDP Wrinkle Black HD High Output Alternator XD512 is designed to improve the charging system in your 2003-2007 Dodge 5.9L Cummins.\u003c\/p\u003e\u003cp\u003eThe Dodge Ram Cummins powered trucks are renowned workhorses and are a great platform for modifications, but the charging system is often neglected. Popular aftermarket add-ons like upgraded stereo systems, snow plows, off-road lights, and on-board air systems can push the limits of your factory charging system.\u003c\/p\u003e\u003cp\u003eThe XDP Wrinkle Black HD Output Alternator increases the output of your charging system so you can consistently and reliably run your aftermarket electronic accessories. The HD High Output Alternator features a 245 amp output that will help decrease strain on the electrical system in your Dodge Ram.\u003c\/p\u003e\u003cp\u003eFor corrosion protection and improved aesthetics, this alternator has an ultra-durable wrinkle black coating. Each alternator comes pre-tested with results and is ready for installation using your existing belt, electrical connections, and mounting location.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBolt-On Upgrade\u003c\/li\u003e\n\u003cli\u003e245 Amp Peak Output\u003c\/li\u003e\n\u003cli\u003e100 percent Brand New, No Core!\u003c\/li\u003e\n\u003cli\u003eDurable Wrinkle Black Finish\u003c\/li\u003e\n\u003cli\u003ePre-Tested With Included Results\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Image shown for display and may not be of exact product.\u003c\/p\u003e","brand":"XDP","offers":[{"title":"Default Title","offer_id":52665766969637,"sku":"HVCD_XD512","price":586.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/7603\/4597\/files\/XD512_0-HVCD.jpg?v=1782745950"},{"product_id":"xdp-reman-6-7-fuel-injector-with-bolt-and-line-cylinders-3-4-5-6-xd490-for-2015-2019-ford-6-7l-powerstroke","title":"XDP Reman 6.7 Fuel Injector With Bolt and Line (Cylinders 3-4-5-6) XD490 For 2015-2019 Ford 6.7L Powerstroke","description":"\u003cp\u003eReplace the failed injector in your 2015-2019 Ford 6.7L Powerstroke with the XDP Remanufactured Fuel Injector With Bolt and Line (Cylinders 3-4-5-6) XD490. With over 30 million fuel injectors on the road, you can be certain each injector is built to meet or exceed the original manufacturer's specifications to ensure you get a high-quality part from XDP.\u003c\/p\u003e\u003cp\u003eEach fuel injector is precision remanufactured to the manufacturer's most current specifications, resulting in less than a 0.2 percent warranty rate. After the remanufacturing process, fuel injectors undergo rigorous testing to ensure nozzle flow, and leakage to guarantee maximum performance and an OE-consistent balanced fuel delivery.\u003c\/p\u003e\u003cp\u003eThe fuel injector bodies feature a Mil-Spec coating for improved rust resistance. Each unit comes complete with new O-rings, a fuel injector hold down bolt, and new fuel injector line to prevent corrosion or debris that can cause damage to the new injector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuality and Testing:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAssembled in a class 100,000 clean room, using original procedure and equipment.\u003c\/li\u003e\n\u003cli\u003eAdvanced end-of-line examinations, tests the opening characteristics, delivery, and leakage.\u003c\/li\u003e\n\u003cli\u003eAll reman assembly and production testing conducted on OE manufacturing equipment.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStock HP and Flow Rating\u003c\/li\u003e\n\u003cli\u003eMeets OE Specifications\u003c\/li\u003e\n\u003cli\u003eNew Hardware And O-Rings\u003c\/li\u003e\n\u003cli\u003eAdvanced End-Of-Line Testing\u003c\/li\u003e\n\u003cli\u003eMil-Spec Coating For Rust Resistance\u003c\/li\u003e\n\u003cli\u003ePerformance Testing Of Nozzles For Flow and Leakage\u003c\/li\u003e\n\u003cli\u003eIncludes New Fuel Injector Line and Hold Down Bolt\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"XDP","offers":[{"title":"Default Title","offer_id":52665767002405,"sku":"HVCD_XD490","price":209.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/7603\/4597\/files\/XD490_2-HVCD.jpg?v=1782745951"},{"product_id":"xdp-reman-6-7-fuel-injector-with-bolt-and-line-cylinders-1-2-7-8-xd489-for-2011-2014-ford-6-7l-powerstroke","title":"XDP Reman 6.7 Fuel Injector With Bolt and Line (Cylinders 1-2-7-8) XD489 For 2011-2014 Ford 6.7L Powerstroke","description":"\u003cp\u003eThe XDP Remanufactured Fuel Injector With Bolt and Line (Cylinders 1-2-7-8) XD489 is a high-quality replacement for the failed injector in your 2011-2014 Ford 6.7L Powerstroke. With over 30 million fuel injectors on the road, you can be certain each injector is built to meet he original manufacturer's specifications to ensure that you get a superior quality product.\u003c\/p\u003e\u003cp\u003eEach Fuel Injector is precision remanufactured to the engine manufacturer's most current design specifications, resulting in less than a 0.2 percent warranty rate. Each injector undergoes nozzle flow performance testing for flow and leakage to guarantee like-new performance and an OE-consistent balanced fuel delivery.\u003c\/p\u003e\u003cp\u003eThe injector bodies feature a durable Mil-Spec coating for improved corrosion resistance and come equipped with all new O-rings, hardware, and a hold down bolt. A new fuel injector line is provided to eliminate any existing corrosion or debris which can cause damage to the new unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuality and Testing:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAssembled in a class 100,000 clean room, using original procedure and equipment.\u003c\/li\u003e\n\u003cli\u003eAdvanced end-of-line examinations, tests the opening characteristics, delivery, and leakage.\u003c\/li\u003e\n\u003cli\u003eAll reman assembly and production testing conducted on OE manufacturing equipment.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStock HP and Flow Rating\u003c\/li\u003e\n\u003cli\u003eNew Hardware and O-Rings\u003c\/li\u003e\n\u003cli\u003eDurable Mil-Spec Coating\u003c\/li\u003e\n\u003cli\u003eMeets OE Specifcations\u003c\/li\u003e\n\u003cli\u003eAdvanced End-Of-Line Testing\u003c\/li\u003e\n\u003cli\u003eNozzle Performance Testing For Flow and Leakage\u003c\/li\u003e\n\u003cli\u003eIncludes New Fuel Injector Hold Down Bolt and Line\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"XDP","offers":[{"title":"Default Title","offer_id":52665767035173,"sku":"HVCD_XD489","price":219.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/7603\/4597\/files\/XD489_0-HVCD.jpg?v=1782745953"},{"product_id":"xdp-remanufactured-lml-fuel-injector-with-bolt-xd487-for-2011-2016-gm-6-6l-duramax-lml","title":"XDP Remanufactured LML Fuel Injector With Bolt XD487 For 2011-2016 GM 6.6L Duramax LML","description":"\u003cp\u003eThe XDP Remanufactured LML Fuel Injector With Bolt (Stock HP) XD487 provides you with a high-quality replacement for the failed injector in your vehicle. With over 30 million remanufactured parts on the road, you can be sure that these Injectors keep your fuel system performing as it should. Every fuel injector is remanufactured in an IATF facility by specially trained technicians.\u003c\/p\u003e\u003cp\u003eBefore the remanufacturing process, each unit is disassembled, thoroughly cleaned, and undergoes an extensive inspection. Any compromised or out-of-spec parts are discarded and replaced with high-quality components that maintain the factory function. You can be sure that XDP Injectors will provide your vehicle with reliable and dependable fuel flow in all operating conditions.\u003c\/p\u003e\u003cp\u003eEvery Injector from XDP is tested to perform with factory flow and hp rating. Extra attention to detail in the remanufacturing process results in less than an 0.2 percent warranty rate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuality and Testing:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFunction tested to ensure each injector meets OE specifications.\u003c\/li\u003e\n\u003cli\u003eAdvanced end-of-line testing for delivery, leakage, and opening characteristics.\u003c\/li\u003e\n\u003cli\u003eAssembled in clean environment for OE-level quality and reliability.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStock Flow and HP Rating\u003c\/li\u003e\n\u003cli\u003eAdvanced End-Of-Line Testing To Ensure Function\u003c\/li\u003e\n\u003cli\u003eTested to Perform With Factory Flow and Horsepower\u003c\/li\u003e\n\u003cli\u003eRemanufactured With High-Quality Components\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"XDP","offers":[{"title":"Default Title","offer_id":52665767067941,"sku":"HVCD_XD487","price":219.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/7603\/4597\/files\/XD487_2-HVCD.jpg?v=1782745955"},{"product_id":"xdp-remanufactured-7-3l-aa-fuel-injector-xd472-for-1994-1997-ford-7-3l-powerstroke","title":"XDP Remanufactured 7.3L AA Fuel Injector XD472 For 1994-1997 Ford 7.3L Powerstroke","description":"\u003cp\u003eThe XDP Remanufactured 7.3L AA Fuel Injector XD472 will replace the failed injector in your 1994-1997 Ford 7.3L Powerstroke. With over 30 million injectors on the road and years of product design and manufacturing experience, you can be sure you are getting a quality product.\u003c\/p\u003e\u003cp\u003eEach injector surpasses the engine manufacturers most current design specifications. This result in fuel injectors injectors that have less than 0.2 percent warranty rate. Once completely remanufactured, each fuel injector is tested for injection timing measurements, poppet seat leakage test, and shot-to-shot flow meters for best-in-class testing.\u003c\/p\u003e\u003cp\u003eOther tests include tests for leakage and opening operation as well as nozzle flow and needle lift. Quality and Testing Advanced end-of-line testing, delivery, leakage and opening characteristics. Precision remanufacturing process ensures highest quality, reliability and performance.\u003c\/p\u003e\u003cp\u003eOpening clearances are set to exacting specifications; validated with engine and vehicle testing and compared to OE product.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStock HP and Flow Rating\u003c\/li\u003e\n\u003cli\u003eBest In Class End-Of-Line Testing Nozzles Tested For Flow, Leakage and Needle Lift\u003c\/li\u003e\n\u003cli\u003eIn-Line Error Proofing Incorporated In Assembly Process\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"XDP","offers":[{"title":"Default Title","offer_id":52665767100709,"sku":"HVCD_XD472","price":164.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/7603\/4597\/files\/XD472_1-HVCD.jpg?v=1782745957"},{"product_id":"xtra-deep-aluminum-transmission-pan-68rfe-xd452-xdp","title":"Xtra Deep Aluminum Transmission Pan (68RFE) XD452 XDP","description":"\u003cp\u003eAdd 2 quarts of extra fluid capacity and a custom look to the 68RFE transmission in your Cummins powered Ram with the XDP X-TRA Deep Aluminum Transmission Pan (68RFE) XD452. The XDP X-TRA Deep Transmission Pan is built with an aluminum sheet metal construction to give you a race-inspired look that is sleek, lightweight, and durable.\u003c\/p\u003e\u003cp\u003eEach pan features a fully-welded construction and a 3\/8 inch thick mounting flange for added strength and resistance to warping. The CNC engraved bottom provides you with enhanced looks and styling while the direct-fit design allows this pan to easily install using any OE-style gasket.\u003c\/p\u003e\u003cp\u003eAs an upgrade over the factory pan, the X-TRA Deep Pan is equipped with a drain plug and an 1\/8 inch NPT port access to install a transmission temperature sender. This pan comes ready to install with new stainless steel hardware and is backed by the XDP 1-year unlimited mileage warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1\/8 inch NPT Temperature Port\u003c\/li\u003e\n\u003cli\u003eDeep Sump For Added Capacity\u003c\/li\u003e\n\u003cli\u003eFabricated Aluminum Construction\u003c\/li\u003e\n\u003cli\u003e2 Quarts Added Capacity Over Stock\u003c\/li\u003e\n\u003cli\u003eIncludes Stainless Steel Mounting Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplication Notes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDoes not include a gasket or filter.\u003c\/li\u003e\n\u003cli\u003eFits 2007.5-2022 Cummins 6.7L equipped with 68RFE Transmission\u003c\/li\u003e\n\u003cli\u003eIn most cases the factory transmission pan was sealed with RTV Silicone and can be reinstalled the same way (not included).\u003c\/li\u003e\n\u003cli\u003eThe XDP 68RFE Billet Filter Clamp XD478 is required on applications running a stock valve body with a deep transmission pan.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"XDP","offers":[{"title":"Default Title","offer_id":52665767133477,"sku":"HVCD_XD452","price":415.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/7603\/4597\/files\/XD452_3-HVCD.jpg?v=1782745958"},{"product_id":"xtra-deep-aluminum-transmission-pan-47-48re-xd450-xdp","title":"Xtra Deep Aluminum Transmission Pan (47\/48RE) XD450 XDP","description":"\u003cp\u003eAdd 4 quarts of extra fluid capacity to your 47\/48RE transmission with the XDP X-TRA Deep Aluminum Transmission Pan (47\/48RE) XD450. The XDP X-TRA Deep Transmission Pan features a fabricated aluminum sheet metal construction that gives your truck a race-inspired look that is lightweight, durable, and sleek.\u003c\/p\u003e\n\u003cp\u003eEach pan is fully-welded with a 3\/8 inch thick mounting flange for resistance to warping and added strength.\u003c\/p\u003e\n\u003cp\u003eThe CNC engraved bottom provides you with enhanced looks and style and the direct-fit design lets you install this transmission pan using any OE-style gasket. Designed to be an upgrade over the factory transmission pan, the X-TRA Deep Pan is equipped with an 1\/8 inch NPT temperature port and a magnetic drain plug.\u003c\/p\u003e\n\u003cp\u003eThis pan comes ready to install with new stainless steel hardware and is backed by the XDP 1-year unlimited mileage warranty. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1\/8 inch NPT Temperature Port\u003c\/li\u003e\n\u003cli\u003eDeep Sump For Added Capacity\u003c\/li\u003e\n\u003cli\u003eFabricated Aluminum Construction\u003c\/li\u003e\n\u003cli\u003e4 Quarts Added Capacity Over Stock\u003c\/li\u003e\n\u003cli\u003eIncludes Stainless Steel Mounting Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1989-2007 Dodge 5.9L Cummins equipped with 727\/518\/47RH\/47RE\/48RE Transmissions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplication Note:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis transmission pan does not include or require the use of a transmission filter spacer\u003c\/li\u003e\n\u003cli\u003eDoes not include gasket or filter\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"XDP","offers":[{"title":"Default Title","offer_id":52665767166245,"sku":"HVCD_XD450","price":347.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/7603\/4597\/files\/XD450_3-HVCD.jpg?v=1782745960"},{"product_id":"hd-replacement-battery-cable-set-for-1999-2003-ford-7-3l-powerstroke-xdp","title":"HD Replacement Battery Cable Set for 1999-2003 Ford 7.3L Powerstroke XDP","description":"\u003cp\u003eThe XDP HD Replacement Battery Cable Set XD428 is a superior replacement for the frayed or corroded battery cables in your 1999-2003 Ford 7.3L Powerstroke. Old or damaged battery cables can cause a multitude of issues in your truck. From poor charging to hard-starts and even no-start conditions.\u003c\/p\u003e\u003cp\u003eImproperly maintained or failing battery cables can also cause strain on your electrical system and leave you stranded. The XD428 Battery Cable Set is constructed from a 2\/0 (or 00 AWG) wire for superior conductivity and durability.\u003c\/p\u003e\u003cp\u003eEach cable end features crimped-on tin plated copper terminals for a secure long-lasting connection. As an added step, an adhesive lined heat-shrink wrap seals the terminal crimps to prevent oxidization and battery fumes from shortening the life of the cables. Each kit comes ready to install with military style battery terminals, terminal covers, and wire loom for added protection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDirect-Fit\u003c\/li\u003e\n\u003cli\u003e2\/0 Gauge Cables\u003c\/li\u003e\n\u003cli\u003eDurable Wire Looming Military Style Battery Terminals\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplication Note:\u003c\/strong\u003e This kit has a 90-degree lug fits the following starters: OEM, XDP HD, Mean Green. This kit is only designed to work on trucks with a 54 inch driver side negative cable.\u003c\/p\u003e","brand":"XDP","offers":[{"title":"Default Title","offer_id":52665767199013,"sku":"HVCD_XD428","price":385.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/7603\/4597\/files\/XD428_1-HVCD.jpg?v=1782745961"},{"product_id":"hd-high-output-alternator-new-wrinkle-black-2007-5-2023-dodge-6-7l-cummins-xd354-xdp","title":"HD High Output Alternator (New) Wrinkle Black 2007.5-2023 Dodge 6.7L Cummins XD354 XDP","description":"\u003cp\u003eUpgrade the charging system and improve the underhood looks of your 2007.5-2023 Dodge Ram 6.7L Diesel with the XDP HD High Output Alternator (New) Wrinkle Black XD354. The Dodge\/Ram trucks are one of the most popular platforms to enhance with performance parts, but the charging system is often left behind.\u003c\/p\u003e\u003cp\u003eAdding on popular accessories such as an on-board air system, aftermarket horn kits, off-road lights, plows, stereo equipment, and even performance electronics can put a significant strain on your factory charging system.\u003c\/p\u003e\u003cp\u003eImprove the dependability and output of your charging system and alleviate the strain from these add-on components with the XDP HD Series Alternator. The XDP HD High Output Alternator increases the factory output of your stock alternator.\u003c\/p\u003e\u003cp\u003eThis gives your charging system the capability to handle whatever you can throw at it! Whether you're working through the night plowing snow, or you need that extra power to light the trail with your off-road lights.\u003cbr\u003e\u003cbr\u003eThe XDP HD High Output Alternator (New) Wrinkle Black XD354 features an OEM style clutch pulley that allows the alternator's heavy rotor to absorb the shock each time the alternator cycles on and off. This results in a smoother idle, eliminates belt chirp, and increases the life of your alternator, power steering pump, belt, and all the other components in your belt drive system. Each alternator comes pre-tested with results card and is a direct-replacement for your factory alternator.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBolt-On Upgrade\u003c\/li\u003e\n\u003cli\u003e245 Amp Peak Output\u003c\/li\u003e\n\u003cli\u003e195 Amp Output At Idle\u003c\/li\u003e\n\u003cli\u003eOEM Style Clutch Pulley\u003c\/li\u003e\n\u003cli\u003e100 percent Brand New, No Core!\u003c\/li\u003e\n\u003cli\u003ePre-Tested With Included Results\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"XDP","offers":[{"title":"Default Title","offer_id":52665767231781,"sku":"HVCD_XD354","price":560.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/7603\/4597\/files\/XD354_0-HVCD.jpg?v=1782745963"},{"product_id":"wrinkle-black-hd-high-output-alternator-1994-1997-ford-7-3l-powerstroke-xd357-xdp","title":"Wrinkle Black HD High Output Alternator 1994-1997 Ford 7.3L Powerstroke XD357 XDP","description":"\u003cp\u003eUpgrade the charging system in your 1994-1997 Ford 7.3L Powerstroke with the XDP Wrinkle Black HD High Output Alternator XD357. Many Powerstroke enthusiasts install aftermarket upgrades like plows, off-road lighting, upgraded stereo systems, aftermarket horns, and other aftermarket electronics that can quickly max out the capabilities of your factory charging system.\u003c\/p\u003e\u003cp\u003eThe XDP HD Series High Output Alternator gives you a substantial output increase over your factory alternator. This allows your electrical system to handle the increased load of these popular aftermarket upgrades.\u003c\/p\u003e\u003cp\u003eEach HD Alternator comes with a wrinkle black finish for enhanced aesthetics and corrosion resistance. The XD357 is pre-tested and ready for installation using the factory mounting locations, factory belt, and existing connections.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDirect Bolt-On\u003c\/li\u003e\n\u003cli\u003e200 Amp Output\u003c\/li\u003e\n\u003cli\u003eWrinkle Black Finish\u003c\/li\u003e\n\u003cli\u003eBrand New, No Core!\u003c\/li\u003e\n\u003cli\u003eFits: 1994-1997 Ford 7.3L Powerstroke\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003cbr\u003eProducts manufactured by XDP carry a 1-Year warranty against defects in materials and craftsmanship. The Warranty is Limited to one (1) year from the date of sale and limited solely to the parts contained within the product's kit.\u003c\/p\u003e","brand":"XDP","offers":[{"title":"Default Title","offer_id":52665767264549,"sku":"HVCD_XD357","price":433.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/7603\/4597\/files\/XD357-HVCD.jpg?v=1782745965"},{"product_id":"direct-replacement-high-output-230-amp-alternator-1994-2003-ford-7-3l-powerstroke-xd361-xdp","title":"Direct Replacement High Output 230 AMP Alternator 1994-2003 Ford 7.3L Powerstroke XD361 XDP","description":"\u003cp\u003eDon’t just replace the alternator in your 1994-2003 Ford 7.3L Powerstroke with a parts store replacement, upgrade it with the XDP Direct Replacement High Output 230 AMP Alternator XD361. Your alternator is built with components that wear out over time and could leave you stranded. A failing alternator can cause check engine lights, dimming lights, engine stalling, and other electrical issues.\u003c\/p\u003e\u003cp\u003eThe XD361 is designed to be a direct fit application to make the installation a smooth and easy process. This alternator has a 230 Amp output that will power your aftermarket off-road lights, speakers, air compressor and much more!\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e230 Amp Output\u003c\/li\u003e\n\u003cli\u003eDirect Replacement\u003c\/li\u003e\n\u003cli\u003ePre-Tested and Ready For Installation\u003c\/li\u003e\n\u003cli\u003eFits: 1994-2003 Ford 7.3L Powerstroke\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003cbr\u003eProducts manufactured by XDP carry a 1-Year warranty against defects in materials and craftsmanship. The Warranty is Limited to one (1) year from the date of sale and limited solely to the parts contained within the product's kit.\u003c\/p\u003e","brand":"XDP","offers":[{"title":"Default Title","offer_id":52665767297317,"sku":"HVCD_XD361","price":486.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/7603\/4597\/files\/XD361_3-HVCD.jpg?v=1782745966"}],"url":"https:\/\/8balldieselworkz.com\/collections\/xdp.oembed?page=2","provider":"8Ball Diesel Workz","version":"1.0","type":"link"}