Skip to content

24-hour email supportTech support Mon to Fri, 7:30 AM to 3:30 PM ET

Nick: (845) 625-4919Tommy: 914-860-6725

8Ball Diesel Workz
Sign in Nick: (845) 625-4919Tommy: 914-860-6725 24-hour email supportTech support Mon to Fri, 7:30 AM to 3:30 PM ET

Shop by truck

Pick a make, year and engine to continue.

Wehrli Custom Fabrication

2006-2007 LBZ Duramax Stage 1 High Flow Intake Bundle Kit

Fits

Make
Chevy / GMC
Engine
6.6L LBZ Duramax
Years
2006-2007

From $1,679.00

Choose your options to see the final price

WCFab's Signature 3" Two Piece Y-Bridge, with Upper Crossover and Lower Intercooler Pipes (Flows 36% Better Than Stock!) 3" Hot (Driver) Side Intercooler Pipe with high temperature wire-reinforced boot 3.5” Cold (Passenger)...

Powder Coating:
Tag (Logo) Finish (PCUCTAG):
Truck year

The year of the truck this part is for. It shows in your cart and on your order.

Description

  • WCFab's Signature 3" Two Piece Y-Bridge, with Upper Crossover and Lower Intercooler Pipes (Flows 36% Better Than Stock!)
  • 3" Hot (Driver) Side Intercooler Pipe with high temperature wire-reinforced boot
  • 3.5” Cold (Passenger) Side Intercooler Pipe (Flows 47% Better Than Stock!)
  • High Quality Silicone Boots & Stainless Steel T-Bolt Clamps
  • Map Sensor Seal
  • High Temp O-Ring Seals for Grid Heater and EGR
  • Y-Bridge O-Ring Flange Seals
  • New Up Pipe to EGR Gasket
  • New Grid Heater Install Hardware
  • No Tuning Required, Bolt On!
  • Compatible with stock trucks. No other modifications or upgrades necessary!
  • Custom Powder Coat Finish
  • Made in USA
  • Saves Up to $99 vs. buying included parts individually

Stage 1 upgrade for the 2006-2007 LBZ Duramax improves airflow between the turbo and engine for improved efficiency, throttle response, and turbo spool-up. Eliminates weak points in the factory design that can lead to boost leaks or complete failures in hard-working and high-performance applications.

The 3" Y-Bridge Kit is an upgraded high-flow intake kit for the 2006-2007 LBZ Duramax, which replaces the OEM upper intake manifold supplying air to the engine intake runners. The OEM Y-bridge for these trucks is a poorly designed, slip-fit style two-piece bridge with very little support and is prone to blowing apart under boost on hard-working and high-performance trucks creating poor drivability, reduced fuel economy, and decreased power. This kit is a much improved, high flow, bolt together style two piece 3" bridge which provides a secure sealing surface where the air inlet horn connects to the bridge. 3" high flow upper and lower intercooler pipes feature smooth flowing mandrel bends, CNC machined billet flanges and perfectly compliment the y-bridge to offer a full 3" tract from intercooler pipe slip connection to the engine incorporating the factory grid heater and EGR connection controls.

The Driver (Hot) Side 3" Intercooler Pipe replaces the 2 1/2" OEM piece with a full 3" pipe. The stock part uses a reverse-style bead roll design at the turbo, which is prone to blowing off of the turbo under higher boost levels than stock.

The 3.5" High Flow Passenger (Cold) Side Intercooler Pipe replaces the aging and failure-prone factory plastic piece with larger, more durable, high flow, 14 ga. aluminum fabricated 3.5" components. This part uses CNC machined flanges with double O-ring seals, comes supplied with new wire clip rings for both slip flanges, and uses an upgraded silicone hump boot with stainless steel t-bolt clamps to withstand higher boost pressures than stock to increase reliability and eliminate blown factory boots and horsepower robbing boost leaks.

Finished in your choice of custom powder colors. It pairs best with emissions-compliant tuning and drop-in turbochargers for optimum performance gains.

***NOTE: CSF Aftermarket intercoolers require modification / grinding of intercooler outlet lip for installation.***

Video: https://www.youtube.com/watch?v=wouD-nmi2K8

Not for sale in California.

Fitment and questions

Will this part fit my truck?
Read the fitment notes in the description above, then use Select a Vehicle at the top of the page to filter to your year and engine. If you are still unsure, send the year, engine and VIN to the shop and we will confirm before you order.
Do I need a tune after installing it?
Not always. Parts that change how much air or fuel the engine can use usually call for a tune. Send your parts list through the diesel tuning page and we will tell you.
Can I talk to someone about this part first?
Yes. Call or text the shop at the number at the top of the page and tell us what the truck does.

Your cart (1)

Your performance parts ship free

Free shipping on performance parts over $100.

Subtotal$5,238.53 USD

Taxes and shipping are calculated at checkout. All sales are final. Returns policy Core returns Freight quote

Questions? Email support@8balldieselworkz.com Shop hours: Mon to Fri, 7:30 AM to 3:30 PM ET.Or send us a message

View full cart